SILENT KNIGHT SK-IP-2 IP Communicator

• Listed to ULStandard 864
• Eliminates the cost of two dedicated phone lines. Only the customers shared IPequipment is required.
• Can use newer low-cost, non-analog, digital telephone services such as cable or fiber optics.
• Increases connection supervision to the central station from the once-a-day test signal to once every 30 - 90 seconds.
• Requires no change to the existing panel configuration. The IPCommunicator connects directly to the primary and secondary analog panel telephone ports.
• Fast alarm transmission (less than 10 second transmission time).
• Works over any type of customer-provided Ethernet 10/100 Base network connection (LAN or WAN), DSL modem or cable modem.
• Data transmits over standard contact-ID protocol but is secured with the industrys highest level of encryption (AES 512 bit).
• Supports both dynamic (DHCP) or Public and Private Static IPaddressing.
• Supportsdual-destination IPreceiver address for high redundancy configurations: all signals are sent to a secondary address should the primary become unavailable.
• User programmable UDPports for flexibility and compati- bility with firewalls and other network security components.
• Supports an optional third maintenance receiver installed at the end usersfacility that permits local alarm monitoring. Alarms are received simultaneously at both the central station and the customers facility. Afilter can be applied to annunciate specific alarm types such as trouble-only events.
• Supports upload/download using existing, familiar programming tools.
• Two supervised inputs and two outputs
• RJ45X Ethernet Termination

• 24 VDC non-resettable, filtered, regulated power
• 136 mA in alarm; 93 mA standby
• Operating Temperature: 32 - 120 F (0 - 49C)
• Humidity: 10% 93% non-condensing
• Dimensions: 7.10 W x 8.44 H x 3.12D (19.30cm x 21.44Cm x 7.92cm)
• Weight: 3.55lbs (1.61 Kg)
• Listings: UL, CSFM