SDC Z7852RU-R-E Selectric Pro Electrified SDC Mortise Lockset, Locked from Outside, Failsecure

The SDC Z7852RU-R-E is an electrified mortise right-handed lockset that is locked from the outside only and failsecure operation. The unit is equipped with an SDC lock, a request-to-exit output, an Eclipse with rose lever trim and a satin stainless steel finish.

SDC HiTower locksets comply with all national and regional building codes for locking interior office, elevator lobby, exit and stairwell fire rated doors, where the use of electric strikes and magnetic locks is prohibited. HiTower locksets also provide higher security and superior aesthetics compared to exposed and vulnerable electric strikes and magnetic locks, while eliminating the need for request-to-exit devices. While providing controlled access and remote control capability the door stays latched even when unlocked, maintaining fire door integrity.

The HiTower lock consists of a mechanical door lock controlled by an electric actuator installed in the frame. All access control and monitoring wires are maintained in the frame. Power transfer hinges and wires through the door are not required. All expenses associated with power transfer hinges are eliminated, including costs for door wire chases that must be factory prepared to maintain the doors fire ratings.


Also known as: Z7852RURE

Technical Specifications: Strike: 4-7/8" (standard) Latch Bolt: 3/4" anti-friction bolt with auxiliary deadlatch Door Thickness: 1-3/4" standard Backset: 2-3/4" Door Preparation: ANSI A156.13 Mode: Field Reversible, Failsafe/Failsecure Dual Voltage: 600/300 mA @ 12/24VDC

For more information about the Security Door Controls Z7852RU R E, please contact us.