Security Door Controls
The SDC 45-4SU is an ANSI/BHMA A156.31 Grade 2 electric door strike designed for access-controlled doors equipped with cylindrical or compatible mortise locksets without deadbolts. Featuring field-selectable 12/24V AC/DC operation, reversible fail-safe or fail-secure locking, and integrated latch and keeper monitoring, it supports electronic door release and lock status reporting. The non-handed strike includes a 4-7/8-inch square-corner faceplate in 630 satin stainless steel, a compact 1-3/16-inch body depth, and 1/4-inch horizontal adjustment for installations with limited frame clearance.
The SDC 45-4SU Electric Strike provides electrically controlled door release for cylindrical locksets and compatible mortise locksets without deadbolts. Part of the SDC 45 Series UniFLEX line, the strike uses a centerline latch-entry design that positions the latchbolt between the upper and lower sections of the strike faceplate. Its electrically operated keeper releases the mechanical latch when authorized by a card reader, keypad, or access control panel. The strike accommodates 5/8-inch latchbolts or 3/4-inch latchbolts with a 1/8-inch door gap. Its non-handed construction and reversible locking configuration support commercial entrances, offices, institutional facilities, and controlled-access interior doors.
The 45-4SU operates on field-selectable 12V or 24V AC/DC power, drawing 200mA at 12VDC, 100mA at 24VDC, 140mA at 12VAC, or 70mA at 24VAC. Its locking mode can be changed between fail-secure and fail-safe operation by repositioning a mechanical adjustment screw without disassembling the strike. Fail-secure mode maintains the locked condition when power is removed, while fail-safe mode unlocks the keeper during power loss. The strike includes two standard SPDT dry-contact monitoring outputs rated at 3A and 30V: one reports latch position, and the other reports keeper closed and locked or unlocked status. Optional keeper open/closed monitoring is available under the separate K option.
The SDC 45-4SU measures 4-7/8 inches high, 1-1/4 inches wide, and 1-3/16 inches deep, providing a low-profile installation where door jamb clearance is limited. Its 630 satin stainless steel square-corner faceplate combines corrosion-resistant construction with a durable die-cast strike body and stainless steel operating components. The internally mounted solenoid, plug-in wiring connectors, and included mounting tabs simplify electrical termination and installation in compatible metal or wood frames. A 1/4-inch horizontal alignment adjustment allows installers to position the keeper relative to the existing latchbolt. Proper installation requires accurate centerline positioning, compatible frame preparation, and verification of latch engagement before electrical operation.
The SDC 45-4SU complies with ANSI/BHMA A156.31 Grade 2 requirements and carries a UL 1034 listing for burglary-resistant electric locking mechanisms. Its monitored keeper and latch outputs support access control applications requiring confirmation of door hardware status, including unauthorized-entry detection and lock condition supervision. The strike differs from the SDC 45F-4SU fire-rated Grade 1 model, which is designed for applicable fire-rated door assemblies. The standard 45-4SU should not be substituted for a fire-rated strike where a listed fire door assembly requires one. Compatible installations include electrically controlled entrances with mechanical free egress, subject to the connected lockset and door hardware configuration. The strike is backed by an SDC five-year manufacturer warranty and must be installed according to manufacturer instructions and applicable building and life safety requirements.
Technical Specifications:
|
Security Door Controls
Security Door Controls
Security Door Controls
Posted by 149372 on Nov 22nd 2019
Posted by 56889 on Jun 18th 2013