SDC I7530LAH-X-ML2057 HiTower Failsafe Frame Actuator Controlled Mortise Corbin/Russwin Lockset, Locked from Inside/Outside

The SDC I7530LAH-X-ML2057 is a frame actuator controlled left-handed lockset that is locked from both sides and has failsafe operation. The unit is equipped with a Corbin/Russwin mortise lock, a standard fail-safe actuator that operates at 115 VAC, and has an oil rubbed bronze finish.

SDC HiTower locksets comply with all national and regional building codes for locking interior office, elevator lobby, exit and stairwell fire rated doors, where the use of electric strikes and magnetic locks is prohibited. HiTower locksets also provide higher security and superior aesthetics compared to exposed and vulnerable electric strikes and magnetic locks, while eliminating the need for request-to-exit devices. While providing controlled access and remote control capability the door stays latched even when unlocked, maintaining fire door integrity.

The HiTower lock consists of a mechanical door lock controlled by an electric actuator installed in the frame. All access control and monitoring wires are maintained in the frame. Power transfer hinges and wires through the door are not required. All expenses associated with power transfer hinges are eliminated, including costs for door wire chases that must be factory prepared to maintain the doors fire ratings.


Also known as: I7530LAHXML2057

Technical Specifications: Electrical Specifications: 0.2 Amp @ 115VAC

For more information about the Security Door Controls I7530LAH X ML2057, please contact us.