SDC EMC Electric Latch Retraction Sequencer

The EMC dual channel sequencer module may be used with the S6000FE and S6000PE series Electric Latch Retraction device to provide a delayed signal to operate an automatic door operator or when powering a pair of devices from a single SDC 600 series power supply.

Each of the two sequencer channels provide a voltage output to power an ELR device and a delayed SPST dry auxiliary output for activation of an automatic door operator. Each of the two sequencer channels may be operated independently or in tandem mode for pairs of doors.

When the EMC is used in the tandem mode, power supply requirements for a pair of doors are minimized. Since the attached electric latch retraction devices are powered in a sequential manner, the inrush current of each device is staggered. This creates a lower current requirement upon activation. A smaller power supply can now be used to operate the pair of devices.

UPC: 712905237770
Also known as: SZ-EMC

Technical Specifications: Dimensions: 3.20”W x 4.30”L (81.28mm x 109.22mm) Access Control Inputs: N/O Dry Contact Operator Contacts: 10 AMP @ 30VDC (Resistive) Output Voltage: 12VDC or 24VDC Input Current: 140mA max Input Voltage: 12VDC or 24VDC

For more information about the Security Door Controls EMC, please contact us.