SDC 110IV Concealed Direct Throw Electric Bolt Lock, Mortise, Failsafe
-
MPN: 110IV
-
JMAC ID: 200197075
The SDC 110IV is a fail-safe, mortise-mounted electric bolt lock designed for access-controlled swinging doors, sliding doors, and security cabinets. Operating on field-selectable 12/24VDC power at 900mA or 450mA, the lock uses a direct-throw solenoid mechanism to secure openings when energized and release them when power is removed. Its 1/2-inch diameter stainless steel bolt with a 1/2-inch throw adjusts forward up to 1 inch beyond the faceplate. The 110IV features a 628 clear anodized aluminum finish and does not include an automatic relock switch.
SDC 110IV Fail-Safe 12/24VDC Mortise Electric Bolt Lock
The SDC 110IV Conventional Mortise Electric Bolt Lock provides electrically controlled locking for swinging doors, sliding doors, and specialty security enclosures. Part of the SDC 100/200 Series, the lock features a fail-safe, power-to-lock mechanism that extends the locking bolt when energized and retracts it when power is interrupted. Its direct-throw solenoid operates with compatible access control panels, keypads, card readers, and remote release controls. The concealed mortise design is intended for compatible metal door frames and security applications, including pharmacy cabinets, utility cabinets, display cases, and equipment enclosures.
The 110IV operates on field-selectable 12VDC or 24VDC power, drawing 900mA at 12VDC or 450mA at 24VDC. Its continuous-duty solenoid drives a stainless steel locking bolt measuring 1/2 inch in diameter with a 1/2-inch throw. The bolt assembly adjusts forward up to 1 inch beyond the faceplate to accommodate wider door gaps and specialized mounting conditions. The lock supports integration with compatible electronic access control equipment through an appropriately rated DC power supply. Unlike the SDC 160IV, the 110IV does not include an automatic relock switch to prevent bolt extension while the door remains open.
The SDC 110IV features a 2-3/4-inch-high, 1-1/4-inch-wide, and 1/4-inch-thick faceplate with a 628 clear anodized aluminum finish. Its mortise-mounted construction requires approximately 5 inches of installation depth within a compatible metal frame or enclosure. The lock weighs approximately 1.7 pounds and includes a standard mortise strike for bolt engagement. The adjustable bolt assembly supports installations where the distance between the lock and strike exceeds conventional clearances. The 110IV is not intended for installation in wood frames, and the lock body, strike, and wiring must be aligned according to SDC mounting requirements.
The SDC 110IV is designed for fail-safe electronic locking applications where the secured opening must unlock upon interruption of electrical power. Its power-to-lock operation distinguishes it from the SDC 210HV fail-secure mortise bolt lock, which remains locked when power is removed. Applications requiring automatic relocking can use the SDC 160IV, which incorporates an adjustable ball-type relock switch that prevents bolt extension until the door closes. An optional SDC MC-4 door contact switch provides separate door position monitoring when connected to compatible security equipment. The 110IV is covered by the manufacturer's five-year warranty. Installation must comply with applicable building, fire safety, and emergency egress requirements, including provisions for safe operation during power loss.
UPC: 712905103303
Also known as: SZ-110IV
Technical Specifications:
|
For more information about the Security Door Controls 110IV, please contact us.
- Mortise
- Less Auto-Relock Switch
- Failsafe
- SDC Electric Bolt Lock
- Failsafe 12/24VDC standard
- Optional finishes avialable
2 Reviews
-
SDC-110IV
-
SDC-110IV