Seco-Larm SLI820R Keyless Entry Upgrade

MPN: SLI 820R
JMAC ID: 200409419

$46.50

JMAC_ID:: 200409419
df_manual_boost:: 1.75

Please Note: In order to keep our prices low, we have a minimum order requirement of $99

Product Resources

SLI820R Data Sheet

We're here to help

Request a Quote

Low Price Guarantee

SECO-LARM's SLI 820R connects to most vehicles' factory keyless entry systems to provide a low-cost yet effective complete security system which is armed and disarmed using the customer's own remote control transmitters. In addition, SECO-LARM's SK-919T4J transmitters can be added to make a complete alarm system. The SLI-820R can accept either the vehicle's factory remote controls or SECO-LARM's SK-919T4J. Includes built-in flashing parking light relay. Outputs for door lock/unlock, starter disable, and horn honk. Includes patented dual-stage shock sensor, 3-tone siren, LED, VET button.

Also known as: SLI820R

Technical Specifications:

Horn: 200mA transistor ground
Door lock: 200mA transistor ground
LED output: 15mA
Starter disable: 500mA transistor ground
Parking lights: On-board 10A DPST relay, 3 wires (com & 2 x N.O.)
Siren: +12VDC, 2A, programmable steady/pulse

For more information about the Seco-Larm SLI 820R, please contact us.

LED indicates arming (in passive mode), armed, disarmed, triggered zone and valet.
Easily turns most factory keyless entry systems into complete vehicle alarms.
Uses the vehicle's OEM transmitters to arm and disarm system, or use SECO-LARM's SK-919T4J transmitters to make the SLI-820R a complete alarm.
Automatically learns polarity of vehicle's door locks for simple installation.
Includes dual-stage electronic shock sensor. Separate pre-intrusion and trigger outputs. Siren chirps if light tap is detected, and triggers if strong rap is detected. Miniature size, installs anywhere.
Built-in parking light relay indicates armed, disarmed, triggered, pre-intrusion, zone bypass, valet, and tamper.
Starter disable output. Disables starter once alarm is armed. Starter sensing triggers alarm if thieves attempt to start car.
Push-button included for valet and emergency disarm.
Patented Fail-Safe Arming verifies that the alarm will arm passively.
Siren (+) and horn (-) outputs. Includes 3-tone siren. Chirps indicate arming, armed, disarmed, valet, zone bypass, pre-intrusion, and zone triggered.
5 instant-triggering zones.
Defective zone bypass. Inputs not working properly are automatically bypassed when the alarm is armed.
CE approved.
Programmable for passive/active arming, current/switch sensing, permanent chirp delete, and more.