516-812-0917
Help
Live Chat
Seco-Larm E-9679-8B190Q ENFORCER Long-Range Barrier Sensors for Indoor/Outdoor Access Control, Up to 380ft (120m), 8 Pair, 79" (201cm)
-
MPN: E-9679-8B190Q
-
JMAC ID: 200214432
The ENFORCER Long-Range Barrier Sensors are ideal for protecting indoor or outdoor areas separated by long distances. They feature reliable photobeam technology with a choice of four programmable beam frequencies that provide superior perimeter protection by eliminating crosstalk and interference when multiple units are used. False alarms caused by animals, falling leaves, poor weather, or other sources are minimized by programming the alarm output trigger operation.
The ENFORCER Long-Range Barrier Sensors work in even the most extreme conditions. A built-in heater automatically turns on and off depending on the outside temperature. An environmental control system senses a slow degradation in beam strength when weather conditions worsen to help prevent false alarms.
Installation and alignment is quick and easy with the ENFORCER Long-Range Barrier Sensors. They come with swiveling heads that allow them to be mounted along the same wall or on opposite walls, as well as provide for easy alignment of the beams between the transmitter and receiver.
UPC: 676544014515
Also known as: SL-E96798B19, E96798B190Q
For more information about the Seco-Larm E-9679-8B190Q, please contact us.
The ENFORCER Long-Range Barrier Sensors work in even the most extreme conditions. A built-in heater automatically turns on and off depending on the outside temperature. An environmental control system senses a slow degradation in beam strength when weather conditions worsen to help prevent false alarms.
Installation and alignment is quick and easy with the ENFORCER Long-Range Barrier Sensors. They come with swiveling heads that allow them to be mounted along the same wall or on opposite walls, as well as provide for easy alignment of the beams between the transmitter and receiver.
UPC: 676544014515
Also known as: SL-E96798B19, E96798B190Q
Technical Specifications:
|
For more information about the Seco-Larm E-9679-8B190Q, please contact us.
- Form C relay output
- Rugged aluminum construction
- Built-in tamper switches, one on either end, trigger the alarm if end cap is removed.
- No synchronizing wires required to align the beams.
- For indoor or outdoor perimeter security
- 8 Pairs, 79" (201cm)
- Heater activates at 41ºF (5ºC)
- Terminal block wiring
- Programmable for 4 different frequencies to reduce interference between multiple units
- AGC (Auto Gain Control) circuits regulate beam signals in order to compensate for and ensure operation in rain, fog, and low-temperature conditions
- LED and buzzer alignment indicators.
- Heater for use in cold weather operation.
- Slim design: 2-1/4" x 1-7/8" (55x49 mm).
- Programmable immediate trigger on simultaneous breaking of beams, or trigger after a single pair of beams is broken for at least 2 seconds.
- End caps swivel so sensor can be mounted on a single wall or on opposite walls with no L-bracket needed.
- Install on windows, doorways, skylights, fence tops, and any place where space is limited.
- Long sensor range up to 190ft (60m) outdoors, 380ft (120m) indoors.
Other products from Seco-Larm
Customer Reviews
2 Reviews
-
SECO-LARM-E-9679-8B190Q
-
SECO-LARM-E-9679-8B190Q
