Schlage M490 1500lb 12/24VDC Electromagnetic Lock
-
MPN: M490
-
JMAC ID: 201999100
The Schlage M490 is a heavy-duty, surface-mounted electromagnetic door lock designed for high-security commercial access control applications. Providing 1,500 lbs of rated holding force, it uses fail-safe operation to secure a single door while releasing immediately when power is removed. The lock features automatic 12/24VDC voltage selection, 0.65A current draw at 12VDC, and 0.35A at 24VDC. Its bayonet mounting system, field-selectable handing, and pivoting armature simplify installation. The M490 is ANSI/BHMA A156.23 Grade 1 certified and UL 294, UL 1034, and UL 10C listed.
Schlage M490 1500 lb Heavy-Duty Single-Door Electromagnetic Lock
The Schlage M490 Electromagnetic Lock provides high-security electronic door locking for commercial buildings, offices, healthcare facilities, educational institutions, warehouses, and controlled-access entrances. Part of the Schlage M400 Series, the M490 is designed for single-door applications requiring 1,500 lbs of electromagnetic holding force. Its fail-safe locking mechanism secures the door when electrical power is applied and automatically releases the magnetic bond when power is interrupted. This operating principle supports integration with compatible access control panels, credential readers, request-to-exit devices, and emergency release systems. The lock uses a surface-mounted electromagnetic assembly and a corresponding armature plate to maintain door security without a conventional mechanical latch inside the magnetic locking mechanism. Its aluminum housing with a satin finish (BHMA 628) provides a durable appearance for commercial architectural openings. The M490 is intended for protected indoor installations requiring dependable electromagnetic locking and code-compliant emergency egress arrangements.
The Schlage M490 features Automatic Voltage Selection (AVS), allowing the internal circuitry to detect and configure operation for either 12VDC or 24VDC power without requiring manual voltage selection. The lock draws 0.65A at 12VDC or 0.35A at 24VDC, enabling integration with compatible regulated access control power supplies. Its electromagnetic assembly meets or exceeds the ANSI/BHMA 1,500 lb holding force requirement and incorporates polarity protection to simplify electrical connections. The symmetrical lock design supports field-selectable left-hand and right-hand configurations, allowing installers to position the magnet and wiring compartment according to the door's handing. Unlike the M490P Plus configuration, the standard M490 does not include an integrated magnetic bond sensor, door position switch, or adjustable relock time delay. These monitoring and timing features are available through the separate Plus model. The standard M490 provides direct electromagnetic locking and release through an externally controlled power circuit, making it suitable for installations where monitoring and access decisions are managed by compatible external equipment.
The Schlage M490 uses a bayonet-style mounting bracket that supports the electromagnetic assembly during installation, eliminating the need to hold the full lock weight overhead while securing the mounting hardware. The lock measures 12-1/2 inches long, 3 inches high, and 1-3/4 inches deep, with an approximate weight of 14 pounds. Its pivoting armature mounting system compensates for minor door alignment variations, helping maintain consistent contact between the armature plate and magnetic locking surface. The standard installation accommodates a 1-3/4-inch-thick door using the supplied mounting hardware, while alternative door thicknesses require appropriately sized mounting components. Schlage specifies a minimum 2-3/4-inch-wide flat mounting surface at the door header; compatible filler plates or angle brackets are required when the available mounting area is insufficient. The lock accepts 14-22 AWG conductors and supports additional mounting configurations through optional top-jamb brackets for inswinging doors, HERCULITE glass door mounting kits, and double-door connector hardware. Proper armature alignment, secure bracket attachment, and compatible door preparation are essential for achieving the specified magnetic holding force.
The Schlage M490 is certified to ANSI/BHMA A156.23 Grade 1 and carries UL 1034 listing for burglary-resistant electronic locking mechanisms and UL 294 listing for access control applications. It is also UL 10C listed for use with qualifying fire-rated door assemblies up to 3 hours, with additional cUL and California State Fire Marshal certifications. Its specified operating temperature range is 32 F to 120 F (0 C to 49 C), and the manufacturer identifies the standard M490 as an indoor-use product. The lock must be integrated with appropriate release controls and installed so it does not interfere with required emergency egress or panic hardware. Its electromagnetic holding function does not replace mechanical positive-latching hardware where required for a fire-rated opening. For installations requiring integrated lock monitoring, the Schlage M490P adds a magnetic bond sensor, door position switch, and adjustable 0.5-30 second relock time delay. The related M492 provides electromagnetic locking for double-door openings, while the M490G is designed for compatible outdoor gate applications. Schlage backs the M490 with a limited lifetime manufacturer warranty on the magnetic coil assembly, subject to the manufacturer's warranty terms. Its 1,500 lb holding force, automatic voltage selection, and flexible mounting system support high-security electronic access control installations.
UPC: 043156570195
Technical Specifications:
|
For more information about the Schlage M490, please contact us.