Home
Shop by Brands
Potter
Fire Products
Conventional Accessories
Potter Amseco UDACT-9100 Digital Alarm Communicator Transmitter / Dialer Module

Potter Amseco UDACT-9100 Digital Alarm Communicator Transmitter / Dialer Module

MPN: UDACT-9100
JMAC ID: 200069300

$434.00

Limited Stock

Expedited Shipping Available
Need it Tomorrow?

Need it Tomorrow?

Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.

JMAC_ID:: 200069300
df_manual_boost:: 1.75

Product Resources

We're here to help

Request a Quote

Low Price Guarantee

The Potter Amseco UDACT-9100 Digital Alarm Communicator Transmitter/Dialer Module allows PFC-5000 or PFC-9000 Series Fire Alarm Control Panels to transmit Alarm, Supervisory, and Trouble information on two telephone lines to a monitoring facility.

The UDACT-9100 is powered by the host re alarm control panel and communicates with the re alarm control panel via an RS-485 data link. The unit can be congured for either DACT or UDACT operation.

The UDACT-9100 can be congured locally via the on-board keypad and the CFG-LCD Conguration Tool or with a UIMA programming tool and a computer with an available serial or USB port. In addition the unit can be remotely congured using a personal computer with a modem.

UPC: 785192014041
Also known as: PL-UDACT9100, UDACT9100

Technical Specifications:

Current Consumption: Standby 40 mA, Alarm 60 mA

For more information about the Potter / Amseco UDACT-9100, please contact us.

Programmed to use the Ademco Contact ID and SIA-DCS reporting protocols
Communicates with PFC-5000 or PFC-9000 Series ﬁre alarm control panels via an RS-485 data link
Can be conﬁgured for DACT or UDACT mode of operation
DACT mode transmits a common Alarm, Supervisory, Waterflow and Trouble information
UDACT mode transmits point-speciﬁc Alarm, Supervisory, Waterflow, and Trouble information
UDACT-9100 has the ability of disconnecting the incoming and outgoing calls and capturing the line for transmission to the Digital Alarm Communicator Receiver (DACR)
Onsite or remote programming
Onsite conﬁgurable with the on-board keypad and the CFG-LCD Conﬁguration Tool or using the UIMA Programming Tool and a computer with an available serial or USB port
Remotely conﬁgurable via a Personal Computer with a modem (Conﬁguration is passcode protected)
Provides telephone line monitoring and reports status via LED indication on-board
Provides event logs of 500 entries each to save events from local dialer or remote ﬁre alarm panel
Logs can be reviewed locally with the CFG-LCD Conﬁguration Tool or remotely via modem
Continuously supervises the status of each of two connected telephone lines at approximately one minute intervals
Mounts in a dedicated location in the PFC-5000 or PFC-9000 Series main chassis