Potter / Amseco
The Potter Amseco EWP-202C is a two-channel wireless traffic counter and door annunciator designed to monitor customer entrances and exits using dual active-infrared beams. Featuring a 20-foot doorway detection range, 200-foot wireless transmission range, and resettable 6-digit counter, it tracks incoming and outgoing traffic while producing distinguishable chime sounds. The system operates at 315 MHz and includes an adjustable-volume receiver, wireless push button, reflector, and two 12VAC transformers. A selectable alert mode provides additional unauthorized-entry notification.
The Potter Amseco EWP-202C Wireless Traffic Counter and Annunciator System combines bidirectional people counting, audible entrance notification, and wireless signaling into a single commercial doorway monitoring solution. Designed for retail stores, shopping centers, offices, warehouses, medical facilities, and other customer-facing businesses, the system uses dual active-infrared beams to distinguish incoming and outgoing pedestrian traffic. When a person interrupts the infrared beams, the sensor transmits a wireless signal to the receiver, which registers the event and produces the corresponding entrance or exit chime. The receiver maintains independent entry and exit counts through a resettable 6-digit digital counter capable of displaying values up to 999,999. Its EEPROM memory retains recorded counts during power interruptions, allowing personnel to review traffic activity without losing accumulated data.
The EWP-202C operates using 315 MHz radio-frequency communication with a maximum wireless transmission distance of 200 feet in open-field conditions. The active-infrared sensor provides a selectable detection range of 10 or 20 feet, accommodating different doorway widths and installation layouts. Its pulsed infrared light source operates at 950 nm, while an adjustable sensitivity setting helps technicians configure detection performance for the monitored entrance. The dual-channel wireless receiver features selectable chime tones, status indicators, and an adjustable audible output ranging from 0 to 85 dB. Distinct entrance and exit chime patterns allow personnel to identify movement direction without continuously watching the counter. The included wireless push button provides an additional notification input for locations such as rear entrances or service doors. The system supports 16 million identification code combinations to distinguish compatible wireless transmissions.
The Potter Amseco EWP-202C includes a selectable CHIME mode and ALERT mode for normal business operation and additional after-hours notification. In CHIME mode, the receiver produces audible announcements when the infrared sensor detects pedestrian movement, while recording the corresponding entry or exit count. In ALERT mode, the system provides a selectable 30-second or 60-second entry/exit delay followed by a 50-second audible alarm when triggered. The receiver also incorporates a normally open dry-contact relay output for integration with compatible security alarm panels, video recording equipment, external sirens, bell boxes, and strobe lights. A selectable blocked-beam warning can activate after 10 or 60 seconds of continuous infrared beam obstruction, helping identify conditions that interfere with normal traffic monitoring. These functions allow the same system to support customer traffic counting, entrance announcements, and supplementary security notifications.
The EWP-202C is supplied as a complete wireless annunciator and traffic counting kit, including one EWPT-202 infrared sensor/transmitter, one EWPR-202 receiver with integrated chime and counter, one EWPP-202 wireless push button, one reflector, two 12VAC 20VA transformers, mounting brackets, power cords, and installation hardware. The infrared sensor and reflector mount on opposing sides of the monitored doorway, with the sensor installed at least 2 feet above the floor and aligned to maintain an uninterrupted infrared beam path. The receiver can be mounted separately within the specified wireless transmission range to provide accessible counter readings, volume adjustment, and operating mode selection. Designed for indoor installation, the components operate within a temperature range of 14 F to 122 F (-10 C to 50 C). Proper alignment, avoidance of direct sunlight, and separation from sources of radio-frequency interference help maintain reliable detection and wireless communication. The EWP-202C provides a practical solution for businesses requiring directional visitor counts, audible entrance announcements, and optional security signaling without extensive signal wiring between the doorway sensor and receiver.
Technical Specifications:
|
Potter / Amseco
Potter / Amseco
Potter / Amseco
Potter / Amseco
Posted by 64644 on Dec 31st 2013
Posted by 63801 on Dec 10th 2013