Potter Amseco CHS-24R Selectable Candela Ceiling Mount Horn Strobe, Red, FIRE Lettering 90 dB, 24 Volt DC, 18 to 12 AWG, 6" x 2.6"

  • MPN: CHS-24R
  • JMAC ID: 200406629
$65.25
JMAC_ID:
200406629
df_manual_boost:
1.75
Please Note: In order to keep our prices low, we have a minimum order requirement of $99
The Potter CHS Series is a ceiling mount strobe or horn/strobe combination that offers dependable audible and visual alarms and the lowest current consumption. The CHS offers tamperproof field selectable candela options of 15, 30, 75, 95, 115 and 150 candela.The CHS horn offers a continuous or synchable temporal three in 2400Hz and mechanical tone. All tones are easy for the professional to change in the field by using switches. The models are shipped from the factory in the temporal three alarm mode. The Ceiling Mount Series comes standard with the 4" mounting plate which incorporates the popular Super-Slide feature that allows the installer to easily test for supervision. The product also features a locking mechanism which secures the product to the bracket without any screws showing. The CHS also features the patented Checkmate - Instant Voltage Verification feature which allows the installer to check the voltage drop draw without removing the signal.

UPC: 700217036242
Also known as: PL-CHS24R, CHS24R

Technical Specifications:
  • Operating Temperature: 32°F to 120°F (0°C to 49°C). The CS Series is not listed for outdoor use.
  • Unit Dimensions: 6" (15.24 cm) x 2.6" (6.604 cm)


For more information about the Potter / Amseco CHS-24R, please contact us.
  • Tamperproof field selectable candela options 15, 30, 75, 95, 115 & 150
  • Switch Selection for Continuous or Temporal 3
  • Tamperproof re-entrant grill
  • Surface mount with the CLNGBB (Ceiling Surface Mount Back Box)
  • Silence audible while visual appliance will remain flashing (for use in accepted jurisdictions)
  • Switch Selection for 2400Hz or mechanical Tone
  • Switch Selection for High or Low dBA
  • Input Terminals 12 to 18 AWG
  • Documented lower installation and operating costs
  • Prewire entire system, install mounting bracket, then install signals
  • Synchronize strobe and/or horn with Gentex AVSM Control Module
  • Checkmate - Instant Voltage Verification
  • Nominal voltage 24 VDC
  • Color: Red
  • Super-Slide Bracket - Ease of Supervision Testing
  • FIRE lettering
Live Chat