Potter Amseco AIB Addressable Isolator Base

The Potter Amseco AIB addressable isolator base comes with an integrated isolator module included. The base has a locking feature for the sensor that may be used or removed in the field. Once the head is removed, the isolator is accessible in the bottom of the unit.

The AIB will open the Signaling Line Circuit down stream when a short circuit is detected. This will provide devices between the control panel and the isolator to continue to operate. The short is indicated by a steady amber LED and once the short is removed the unit will return to normal operation.

UPC: 785192018544
Also known as: PL-AIB

Technical Specifications: Dimensions (without detector): Height 2.13 inches (54.4mm), Diameter 6 inches (150mm) Color: Eggshell White Operating relative humidity range: 0% to 93% (Non-condensing) Installation temperature range: 32°F to 120°F (0°C to 49°C ) Maximum number of addressable devices connected to an AIB: 50 units Maximum number of AIB per SLC Loop: Style 4 Number of points of panel divided by 8; Style 6 and 7 Number of points of control panel Resistance of wiring between an AIB and the next AIB in Style 6 or 7: 10 Ω (max.) Resistance of wiring after an AIB in Style 4: 10 Ω (max.) Applicable SLC wiring style: NFPA Style 4,6 and 7 Active indicator: 1 LED (yellow) Active current (Include indicator): 1.85 mA D.C. (max.) Standby current for SLC: 325 µA Working voltage range for SLC: 22.0 to 24.0 V

For more information about the Potter / Amseco AIB, please contact us.