Nedap 9947426 UHF Windshield Tag Tamper Resistant, Wiegand 26, US

  • MPN: 9947426
  • JMAC ID: 200107380
$7.80
In Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
200107380
df_manual_boost:
2.20
Please Note: In order to keep our prices low, we have a minimum order requirement of $99

The Nedap AVI 9947426 is a tamper-resistant UHF RFID windshield tag with 26-bit Wiegand encoding, designed for automatic vehicle identification and long-range parking access control. Featuring passive battery-free operation, EPC Gen 2 compatibility, and 902-928 MHz UHF support, it works with compatible Nedap uPASS readers at distances up to 50 feet (15 meters), depending on the reader and installation. The white adhesive tag measures 4.18 x 1.12 inches and uses destructible material that provides visible evidence of removal, helping discourage unauthorized credential transfer between vehicles.

Nedap AVI 9947426 uPASS Tamper-Resistant UHF Windshield Tag

The Nedap AVI 9947426 uPASS UHF Windshield Tag is a passive radio-frequency identification credential designed for secure, automatic vehicle identification at controlled parking entrances and gated facilities. Part of the Nedap uPASS long-range vehicle identification product family, the 9947426 features factory-programmed 26-bit Wiegand credential formatting for integration with compatible vehicle access control systems. The tag is designed for permanent installation on the inside of a vehicle windshield, allowing authorized vehicles to be identified by an appropriately configured UHF reader without requiring drivers to present a conventional proximity card. Typical applications include commercial parking garages, gated residential communities, condominium developments, office campuses, employee parking facilities, and controlled vehicle entrances where hands-free credential recognition is required.

The 9947426 operates using passive ultra-high-frequency RFID technology compliant with the EPC Gen 2 standard. Unlike active vehicle transmitters, the windshield tag does not contain a battery or require an external electrical connection. Instead, it receives operating energy from the radio-frequency field generated by a compatible Nedap reader and returns its encoded identification information. The manufacturer's technical documentation identifies 902-928 MHz operation for North American applications, with the broader product family also supporting 865-870 MHz regional configurations. The current Nedap uPASS identifier datasheet specifies a maximum identification distance of 15 meters (50 feet) with the uPASS Target reader and 10 meters (33 feet) with the uPASS Go reader. Actual detection range depends on reader configuration, antenna positioning, windshield construction, surrounding vehicles, and local environmental conditions. Compatible legacy readers include the uPASS Reach and uPASS Access, both identified as end-of-life products in the current manufacturer documentation.

Designed for permanent vehicle credential identification and resistance to unauthorized transfer, the Nedap 9947426 incorporates a thin, flexible adhesive label with a destructible construction. Once attached to a properly prepared windshield, the tag is difficult to remove intact and functional, and removal attempts leave visible evidence of tampering. This design helps discourage transferring an authorized parking credential from one vehicle to another. The tag features a white printed surface, UV-resistant construction, and pressure-sensitive adhesive for installation on interior windshield glass. Its standard stock configuration uses 26-bit Wiegand encoding; applications requiring a particular facility code, credential numbering sequence, or specialized programming should verify the stock encoding or specify an appropriate custom-programmed Nedap identifier. The tag itself does not control a gate or make access authorization decisions. Those functions are performed by the connected reader, access control system, and gate operator equipment.

The Nedap AVI 9947426 measures 4.18 inches long by 1.12 inches wide (approximately 106.2 x 28.4 mm) and weighs approximately 1 gram. Its manufacturer-specified IP54 environmental protection rating provides resistance to limited dust ingress and water splashes, while its operating temperature range extends from -4 F to 158 F (-20 C to 70 C). The tag supports relative humidity from 10% to 93%, non-condensing, and is designed for interior windshield mounting rather than external body-panel attachment. For reliable operation, Nedap recommends positioning the tag horizontally near the rearview mirror, on the side of the windshield facing the installed reader, and testing the detection location before permanently applying the adhesive. Vehicles with metallic windshield coatings or certain window films may require an alternative exterior-mounted credential. The 9947426 provides a battery-free, low-maintenance vehicle identification solution for compatible Nedap uPASS parking and access control installations.



UPC: 999999389076
Also known as: 2N-9947426

Technical Specifications:
  • Mounting Onto the windshield, the tag is featured with a standard pressure-sensitive
  • Tag Formats Wiegand, Magstripe, Nedap XS format (compatible to Nedap’s tag format)
  • Identification R/O Read only number
  • Customisation Customised tag printing on request, Optional Barcode 39 printed on the tag on request
  • Humidity 10% ... 93% relative humidity, non condensing
  • Detection range 5 meters [16 ft] with uPASS Reach
  • Operating temperature -20 ... +70°C [-4 … +158°F]
  • Material Polyester
  • Colour White with printing
  • Protection IP54 [approx. NEMA 2]
  • Standard EPC Gen 2
  • adhesive back
  • Dimensions: 106.5 x 28.5 mm
  • Operating frequency 865 - 870 MHz, 902 - 928 MHz


For more information about the Nedap AVI 9947426, please contact us.
  • UHF labels are provided with a special security protection that ensures data integrity and prevents copy attempts
  • Compliant with the EPC Class 1 Gen 2 standard
  • Specialty RFID labels designed for vehicle identification

2 Reviews

  • 5
    NEDAP-AVI-9947426

    Posted by 111884 on Apr 24th 2017

  • 5
    NEDAP-AVI-9947426

    Posted by 98162 on May 10th 2016

Live Chat