Napco GEMX255 Control Panel, 255 Fully Programmable Zones, 195 Users & Supports

NAPCO's Gemini GEM-X255 is a state-of-the-art microcomputer-based burglary and residential fire alarm control panel of modular design. Integrally an 8-zone panel, it will support up to 255 zones with optional zone expansion modules, wireless receiver modules and/or GEM-RP1CAe2/GEM-K1CA Keypads. Each panel includes an integral digital communicator. The control panel features programmable area partitioning. That is, the system may be divided into up to 8 discrete multiple-zone areas, each allowing access by only those users programmed for their respective area(s).

Technical Specifications: Keypad Dimensions: 4 3/8” x 5 7/8” x 1 1/6” (HWD); 11.1cm x 14.9cm x 2.7cm (HWD) Maximum number of keypads: 15 maximum wiring length for each run (#22AWG): 1000’ divided by total number of keypads & EZMs on run Keypad current: GEM-RP1CAe2, GEM K1CA: 100mA; 35mA if back lighting is disabled (cut W1, W2 & W3) PGM output: 5mA, 12V special application EZM Module: GEM-EZM8: input, 50mA (including PGM Output) PGM output: 5mA, 12V special application Standby time: Residential fire/burglary & commercial burglary, 4 hours minimum Remote power output: 12Vdc regulated (for keypads) 750 mA combined Standby Current (Remote Power + Aux. Power + Reset Relay Power) Auxiliary power output: 12 Vdc regulated Relay outputs (burglary; reset; aux): wet, 12Vdc, 1.2A max.; dry (cut related jumper for dry contacts), SPDT contacts 24Vdc, 2A Loop resistance: 300W max.; 50W for 2-wire smoke detector zones Loop current: 2.5mA with 2.2ohm end-of-line resistor (model EOL2.2K); 5mA for 2-wire smoke-detector zones Loop voltage: 10-13VAC Input power: 16.5Vac via Class 2 Plug-In 40VA Transformer, supplied Operating temperature: 0-49ºC (32-120ºF)

For more information about the Napco GEMX255, please contact us.