Napco PIR1680PT Microprocessor PIR Sensor, 65lb Pet Immunity, Room-Temp Alert

Advanced PIR1680 Series Passive Infrared Motion Detectors exemplify NAPCO sensor technologys innovation, increasing dependability without compromising intruder catch sensitivity. For applications where animal/pet immunity is key, the PIR1680PT supports 65lb. (29kg) pet protection within its 45 (13.7m) range. Or, the original model PIR1680, has a 50 (15.2m) range and offers nominal 20lb. (9kg) animal/rodent immunity. Outstanding false alarm rejection in both models is made possible with their advanced microprocessor that has been embedded with a library of valid and false alarm signal signaturesenabling the PIR to differentiate intruders from animals and other traditional false alarm sources. In addition to proven intruder-detection circuitry, these units also feature a built-in temperature sensor at no additional chargeso you can provide traditional security, as well as climate security from heat and/or freeze damages, when HVAC systems fail, before pipes burst or dcor, pets or perishables are ravaged by heat extremes, otherwise left unchecked.

Technical Specifications: Power supply requirements: Filtered 10.6 to 16VDC nominal with battery backup form the control panel. Self-Test Interval: 11 - 16 hrs. Multi-mode Trouble Output (Open collector) Freeze damage alert: 40oF (4oC) Shipping weight: 5 oz (142 gm) Dimensions: 3.3”H x 2.5”W x 1.9”D (8.4 x 6.4 x 4.8 cm) (HxWxD) Current drain: 28mA (idle/alarm) at 12VDC (nominal) Alarm Relay: 100mA, 24Vdc with internal 10 ohm current limiting resistor Relay time: Approx. 3 seconds Output relay: Form A; normally closed Mounting: Wall or corner, 12’ (3.6m) max.; For pet/animal applications 7’ (2.1m) is recommended. Heat damage alert: 90oF (32oC) Operating temperature: -10 to +50 degrees C (14o to 122o F) Microprocessor: 2K ROM with A-D Converter

For more information about the Napco PIR1680PT, please contact us.