Home > Muxlab > Wall Plate Baluns >

Muxlab 500033-WP-US Quad Audio Wall Balun, US
500033-WP-US Muxlab | JMAC Supply

Our Price: $70.11

Product Code: MUXLAB-500033-WP-US

Description Product Resources

Go long.  No, longer...like 2/3rds-of-a-mile long.

Why? Because that's how far this Wall Balun can transmit an audio line over Cat5 cable -- 3,250 feet.  Capable of sending up to four signals in a point-to-point connection, the Quad Audio Balun is perfect for custom home/commercial audio systems, intercoms, and conferencing systems.  Often used in pairs, it works in conjunction with the Muxlab 5000019.

Muxlab 500033-WP-US Quad Audio Wall Balun, US

  • Also known as: 500033WPUS, 5M-500033WP

  • The Quad Audio Wall Balun (500033-WP-US) allows up to four (4) analog line audio signals to be transmitted via unshielded twisted pair (UTP) cable in a point-to-point connection. Used in pairs, the Quad Audio Wall Balun allows up to four (4) coax audio cables to be replaced by one (1) Cat5e/6 cable. The Quad Audio Balun also works in conjunction with other MuxLab analog audio baluns such as the 500019.
    • Cost-efficient cabling - save up to four (4) cables
    • 20 Hz to 20 KHz bandwidth for high fidelity
    • Analog audio up to 3,250 ft (1.0 km) via Cat5e/6
    • Compact design for neater wiring
    • Compatible with Decora face plates

    Technical Specifications:

    • Environment: Unbalanced line-level analog audio.
    • Devices: DVD players, audio receivers, audio amplifiers and audio mixers, audio matrix switchers and other unbalanced line-level audio equipment.
    • Transmission: Transparent to the user
    • Bandwidth: 20 Hz to 20 kHz
    • Peripherals Impedance: Source 100 Mx, Receiver 10 k min.
    • Insertion Loss: Less than 2 dB per pair over the frequency range
    • Common Mode Rejection Ratio: Greater than 60 dB at 1 kHz
    • THD: Less then 0.007% @ 1 kHz
    • Maximum Input Level: 1.1 Vp-p
    • Impedance Transformation Ratio: Single unit: 4:1 (source: line)
    • Cable: Cat 5E UTP/STP: 24 AWG or lower solid copper twisted pair wire, Impedance: 100 ohms at 1 MHz, Maximum capacitance: 20 pf/ft, Attenuation: 6.6 dB/1,000 ft at 1 MHz
    • Unbalanced In/ Out Cable: Shielded, coaxial
    • Ground Loop Isolation: Range of +/-50VDC
    • Connectors: Four (4) RCA receptacles for audio, one (1) RJ45 jack
    • Pin Configuration: Audio 1: Pins 7(R) & 8(T) Audio 2: Pins 3(R) & 6(T) Audio 3: Pins 4(R) & 5(T) Audio 4: Pins 1(R) & 2(T)
    • Max. Distance: Cat 5E/6 UTP/STP: 3250 ft (1 km)
    • Temperature: Operating: 0 to 55C, Storage: -20 to 85C, Humidity: Up to 95% non-condensing
    • Enclosure: Fire retardant plastic
    • Weight: 4.1 oz (115 g)
    • Dimensions: 4.1 (104 mm) x 1.8 (45.7 mm) x 1.44 (36.6 mm). Choose 1.6 (40 mm) deep back box to allow for Cat 5E/6 wiring connection.

    UPC: 627699920336

    Average rating: 5.0, based on 2 reviews

    For more information about the Muxlab 500033-WP-US, please contact us.

    Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    Muxlab > Wall Plate Baluns
    Signal Transmission & Distribution > UTP Transimission (Baluns) > Audio Baluns
    Signal Transmission & Distribution > UTP Transimission (Baluns)