Muxlab 500033-WP-UK Quad Audio Wall Balun, UK

The Quad Audio Wall Balun (500033-WP-UK) allows up to four (4) analog line audio signals to be transmitted via unshielded twisted pair (UTP) cable in a point-to-point connection. Used in pairs, the Quad Audio Wall Balun allows up to four (4) coax audio cables to be replaced by one (1) Cat5e/6 cable. The Quad Audio Balun also works in conjunction with other MuxLab analog audio baluns such as the 500019.


Also known as: 500033WPUK

Technical Specifications: Dimensions: 86 mm x 86 mm x 36 mm. Choose 40 mm deep back box to allow for Cat5e/6 wiring connection. Weight: 4.1 oz (115 g) Enclosure: Fire retardant plastic Temperature: Operating: 0° to 55°C; Storage: -20° to 85°C; Humidity: Up to 95% non-condensing Max. Distance: Cat 5e/6 UTP/STP: 3250 ft (1 km) Pin Configuration: Audio 1: Pins 7(R) & 8(T) Audio 2: Pins 3(R) & 6(T), Audio 3: Pins 4(R) & 5(T) Audio 4: Pins 1(R) & 2(T) Connectors: Four (4) RCA receptacles for audio, one (1) RJ45 jack Ground Loop Isolation: Range of +/-50VDC Unbalanced In/ Out Cable: Shielded, coaxial Cable: Cat 5E UTP/STP: 24 AWG or lower solid copper twisted pair wire; Impedance: 100 ohms at 1 MHz; Maximum capacitance: 20 pf/ft; Attenuation: 6.6 dB/1,000 ft at 1 MHz Impedance Transformation Ratio: Single unit: 4:1 (source: line) Maximum Input Level: 1.1 Vp-p THD: Less then 0.007% @ 1 kHz Common Mode Rejection Ratio: Greater than 60 dB at 1 kHz Insertion Loss: Less than 2 dB per pair over the frequency range Peripherals’ Impedance: Source 100 Ω Mx, Receiver 10 kΩ min. Bandwidth: 20 Hz to 20 kHz Transmission: Transparent to the user Devices: DVD players, audio receivers, audio amplifiers and audio mixers, audio matrix switchers and other unbalanced line-level audio equipment. Environment: Unbalanced line-level analog audio.

For more information about the Muxlab 500033-WP-UK, please contact us.