MMTC 3BXT NEMA 4 Three-Button Door Control Station
-
MPN: 3BXT
-
JMAC ID: 200477457
The MMTC 3BXT is a NEMA 4-rated exterior three-button control station designed for operating commercial garage doors, industrial overhead doors, and compatible automatic gate systems. Featuring OPEN, CLOSE, and STOP push buttons, double-pole contacts, and a fully guarded non-metallic enclosure, the station provides independent control of motorized door and gate operators. Its NEMA 3R, 4, and 12 enclosure ratings support installation in demanding environments, while UL listing and CSA approval provide additional electrical safety assurance. The surface-mounted unit measures 5-3/4 inches high, 2-3/4 inches wide, and 2-1/2 inches deep.
MMTC 3BXT NEMA 4 Exterior Three-Button Open-Close-Stop Control Station
The MMTC 3BXT Exterior Three-Button Control Station provides manual operation of commercial overhead doors, industrial garage doors, and compatible motorized gate systems through three individually labeled push buttons. Designed for exterior surface mounting, the station features vertically arranged OPEN, CLOSE, and STOP controls that allow operators to issue separate movement commands to connected door or gate equipment. The buttons feature yellow, black, and red actuators, respectively, with protective guards surrounding each control to reduce unintended activation. Its non-metallic, weather-resistant enclosure accommodates installations at loading docks, warehouses, parking facilities, industrial buildings, and commercial entrances where local control is required. The 3BXT operates as a hardwired control interface and connects to a compatible operator's control circuit rather than functioning as a standalone motor controller.
The MMTC 3BXT features three double-pole push-button contact assemblies, each providing both normally open (NO) and normally closed (NC) contacts for flexible integration with commercial door and gate operators. Manufacturer documentation specifies a 12-amp contact rating at 600 VAC, allowing the station to interface with appropriately rated electrical control circuits. The OPEN and CLOSE buttons provide independent command contacts, while the STOP button can be wired into the operator's stopping circuit according to the equipment manufacturer's wiring requirements. The station incorporates a NEMA 3R, 4, and 12-rated enclosure for resistance to outdoor weather exposure, water intrusion, and industrial dust. Its protective construction supports operation in commercial and industrial environments where an exposed interior control station would be unsuitable. The 3BXT is also UL listed and CSA approved, supporting installation in electrical control applications requiring recognized safety certifications.
The MMTC 3BXT exterior control station uses a compact surface-mount design measuring 5-3/4 inches high, 2-3/4 inches wide, and 2-1/2 inches deep. Its vertically aligned push buttons and clearly identified command labels provide straightforward operation while minimizing the amount of wall space required for installation. The non-metallic enclosure houses the three push-button assemblies and their associated electrical contacts, protecting the internal switching components from environmental exposure. Each control incorporates separate NO and NC contact terminals, allowing installers to configure connections according to the supported operating logic of the connected equipment. Typical applications include commercial sectional overhead doors, rolling steel doors, industrial garage door operators, and compatible automated gate systems. Installation requires connecting the station to the operator's designated control terminals and verifying the correct OPEN, CLOSE, and STOP wiring arrangement. The station does not contain a motor, receiver, or electronic access control processor and must be used with compatible external operating equipment.
For commercial facilities requiring reliable local door operation, the MMTC 3BXT combines three-button manual control with a weather-resistant exterior enclosure. The fully guarded push-button design helps reduce accidental operation in loading areas, maintenance facilities, and other locations where equipment or personnel may contact the control station. Its double-pole contact configuration provides wiring flexibility for operators that use normally open command inputs, normally closed stop circuits, or other supported control arrangements. The surface-mounted enclosure allows the station to be positioned at a convenient operating location without requiring a recessed electrical box. Installers should verify the door or gate operator's control voltage, terminal configuration, contact requirements, and applicable safety standards before installation. The MMTC 3BXT is a non-metallic exterior control station and should not be confused with the manufacturer's metal-enclosure or keyed-lockout control station models. With its NEMA 3R, 4, and 12 environmental ratings, UL listing, CSA approval, and independent OPEN-CLOSE-STOP controls, the 3BXT provides a hardwired operating interface for commercial and industrial door automation systems.
For more information about the MMTC 3BXT, please contact us.