
Keri Systems NXT-4D-MSC Door Reader Controller, 4-Door/8-Reader, 12 Volt DC, 650 Milliampere Input, 24 Volt DC, 1 Ampere Output, With Mercury Firmware
-
MPN: NXT-4D-MSC
-
JMAC ID: 200413502
The KERI-SYSTEMS-NXT-4D-MSC Four Door/Eight Reader Controller is built for today's IT environments. With all Ethernet functionality built directly into the controller, Keri's proprietary MAC address allows for reliable hardware discovery and true 1 button autoconfiguration.
By using an existing TCP/IP network, controller cabling costs can be eliminated, or by using inexpensive unshielded CAT5 cable if building a new network they can be reduced up to 50% over traditional hard-wired access systems.
The NXT-4D is designed to be extremely intelligent with little reliance on network traffic for decision making allowing it to be extremely thrifty with any network's valuable bandwidth. The unit is equipped with a Mercury power system that brings enchanced capabilities to users of the NXT hardware platform.
UPC: 819345010274
Also known as: KSI-NXT4DMSC, KF-NXT4DMSC, NXT4DMSC
For more information about the Keri Systems NXT-4D-MSC, please contact us.
By using an existing TCP/IP network, controller cabling costs can be eliminated, or by using inexpensive unshielded CAT5 cable if building a new network they can be reduced up to 50% over traditional hard-wired access systems.
The NXT-4D is designed to be extremely intelligent with little reliance on network traffic for decision making allowing it to be extremely thrifty with any network's valuable bandwidth. The unit is equipped with a Mercury power system that brings enchanced capabilities to users of the NXT hardware platform.
UPC: 819345010274
Also known as: KSI-NXT4DMSC, KF-NXT4DMSC, NXT4DMSC
Technical Specifications:
|
For more information about the Keri Systems NXT-4D-MSC, please contact us.
- 4 Door/8 Reader Controller for Keri's Doors NXT product line
- Locking Metal Enclosure (optional without)
- 50,000 Cardholders, 10,000 Selectable Event Buffer per controller
- Up to 64 Controllers (256 doors) and 1024 auxiliary I/O points per controller network
- Flash Memory for easy firmware upgrades
- Re-assignable Inputs and Outputs
- Standard 4 PIN Block and RJ Jack built-in for network connection
- On-board TCP/IP - no network adapters required
- Reduces controller cabling cost up to 50% over RS-485, Current Loop or other traditional networking schemes by allowing unshielded CAT5 cable
- 96 Bit Encryption
- Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5 Network
- Embedded MAC Address for One button AutoConfiguration
- Built-In Tamper Input
1 Review
-
KERI-SYSTEMS-NXT-4D-MSC