Inovonics EN1233D Double-Button Necklace Pendant Transmitter
-
MPN: EN1233D
-
JMAC ID: 200012352
The Inovonics EN1233D is a double-button wireless necklace pendant transmitter designed for personal emergency signaling, duress alarms, and security applications. Operating on the 902-928 MHz EchoStream frequency-hopping wireless platform, it requires simultaneous activation of two buttons to reduce accidental alarms. The pendant features an LED transmission indicator, supervised 3-minute check-in intervals, and a replaceable 3V CR2 battery with a typical 3-5-year lifespan. Its compact housing can be worn with the included necklace or mounted for fixed-position signaling.
Inovonics EN1233D EchoStream Double-Button Wireless Necklace Pendant Transmitter
The Inovonics EN1233D Double-Button Necklace Pendant Transmitter provides portable wireless alarm activation for commercial security, personal emergency signaling, and duress notification applications. Designed for use with compatible Inovonics EchoStream wireless receivers, the pendant enables users to transmit an alarm signal by pressing both activation buttons simultaneously. This dual-button design helps prevent accidental alarm transmissions caused by unintended contact with a single button. The transmitter can be worn around the neck using the included necklace or installed in a fixed location for manual alarm activation. Its compact, rugged housing supports applications in commercial offices, healthcare facilities, educational institutions, and security operations where personnel require access to a wireless alarm signaling device.
The EN1233D uses Inovonics EchoStream frequency-hopping spread spectrum (FHSS) technology, operating across the 902-928 MHz frequency band in North America. The transmitter sends multiple alarm messages when both buttons are pressed, improving the opportunity for a compatible receiver to detect the activation. An integrated LED flashes during every transmission, providing immediate visual confirmation that the device is transmitting. When the buttons are released, the pendant sends an alarm restoration message to the receiving system. Each transmitter contains a unique factory-programmed identification number for individual enrollment and monitoring. When registered with a compatible supervised receiver or network coordinator, the EN1233D transmits an automatic supervision check-in message every 3 minutes, allowing the system to monitor communication with the pendant.
The Inovonics EN1233D measures 3.0 inches high, 1.6 inches wide, and 0.72 inches deep (76 40 18 mm) and weighs approximately 1.6 ounces (45 g). Its lightweight construction supports comfortable daily use, while the included necklace provides a convenient wearable configuration. Power is supplied by a replaceable 3V Panasonic CR2 lithium battery, identified as the Inovonics BAT608 replacement battery, with a typical operating life of 3-5 years under normal supervised conditions. The pendant operates in temperatures from 32 F to 140 F (0 C to 60 C) and relative humidity levels up to 90% non-condensing. Compatible necklace accessories include the ACC603M metal necklace and ACC603P plastic necklace. The device meets applicable FCC requirements and is RoHS compliant.
The EN1233D EchoStream Wireless Pendant integrates with compatible Inovonics receivers, including the EN4000 universal serial receiver, EN4200 security-only serial receiver, EN4204R four-zone receiver, EN4216MR 16-zone multi-condition receiver, and EN4232MR 32-zone multi-condition receiver. Compatible EchoStream repeaters, including the EN5040 series, can extend wireless coverage in supported installations. During commissioning, installers select the appropriate regional frequency band, register the transmitter's unique identification number with the receiving system, and test alarm activation and restoration. The internal reset button supports battery initialization and enrollment procedures. The EN1233D differs from the EN1233S single-button necklace pendant by requiring simultaneous two-button activation, while the EN1235D provides a double-button belt-clip alternative. Wireless coverage depends on building construction, receiver placement, and the surrounding radio environment. The EN1233D requires compatible receiving equipment and must be configured and tested according to Inovonics installation instructions.
UPC: 875189002875
Also known as: IV-EN1233D
Technical Specifications:
|
For more information about the Inovonics EN1233D, please contact us.
- Can be worn as as a neck pendant or mounted for fixed position signaling
- Double-button design reduces false alarms
- EN50131 Security Grade 2
- LED flashes with all transmissions, ensuring operation at a glance
2 Reviews
-
INOVONICS-EN1233D
-
INOVONICS-EN1233D