IEI ProxPad Wiegand 125 kHz Proximity Reader with Keypad

The IEI ProxPad is a stand alone proximity reader and keypad that can support up to 2000 users and mounts easily to a single-gang electrical box and most flat surfaces.

The ProxPad provides standard access control functionality with the use of its two relays and two inputs for request-to-exit and door position. Using the proximity reader and keypad together can achieve a higher level of security by requiring both to grant entry access. The ProxPad can be used for stand alone access control, or used as a reader for IEI access systems, or most Wiegand systems.

The proximity reader is capable of being mounted anywhere within a 10 foot range of the ProxPad.

UPC: 783950056760
Also known as: IE-PROXPAD

Technical Specifications: Bi-Color LED: Red/Green Operating Humidity: 5% to 95% relative humidity, non-condensing Operating Temperature: -31° to 150° F (-35° to 66° C) Users (standalone mode only): 2000 Maximum (each user can have a card, PIN or both) Sounder: 4000 Hz, defeatable Door Position Switch: Normally Closed, Dry Contact Aux Relay: Form C (switches up to 1A) Main Relay: Form C (switches up to 2A) Depth: 1.375 in (3.5 cm) Width: 2.75 in (7 cm) Height: 5.25 in (13.3 cm) REX Cable: [ALPHA 2421C 18 AWG or ALPHA 1292C 22 AWG, 2 conductor, stranded and shielded] (if using remote switch) Door Monitor Cable: 18AWG - 22 AWG 2-wire stranded (depends upon distance) Door Lock Cable: 18AWG - 22 AWG 2-wire stranded (depends upon distance) Power Supply Cable: 18AWG - 22 AWG 2-wire stranded (depends upon distance) Secured Series Front End Cables: [ALPHA 1295C (22AWG) 4-conductor, stranded and shielded] Wiegand Interface Guide: [ALPHA 1295C (22AWG) 5-conductor, stranded and shielded] Remote Antenna Cable (if installing in a secured configuration): [ALPHA 1294C (22AWG) 4-conductor, stranded and shielded] Power Supply/Current Requirements: 10-15 VDC, linear fi ltered and regulated power supply; 55mA

For more information about the IEI ProxPad, please contact us.