Honeywell Video HD3MDIH equIP Series 720p 3.3-12mm VFAI Lens True Day/Night H.264 Indoor Fixed Minidome Camera, NTSCUPC: 619172083157
Also known as: HD3MDIH
From Honeywell's equIP Series of IP-based products, the HD3MDIH is a high definition, True Day/Night indoor fixed minidome network camera engineered to provide extremely crisp images at minimal bandwidth. The HD3MDIH provides 720p resolution at full frame rate. Progressive scan technology and 2D edge enhancement provide outstanding clarity and definition. Digital Noise Reduction results in significant storage savings without sacrificing image quality in low light. The 1/4" progressive scan CMOS sensor offers the latest in digital video surveillance technology with accurate color rendition through a wide variety of lighting conditions. The HD3MDIH also supports the PSIA specification for interoperability between network video products.
The compact, one piece design provides fast and easy installation in any application. The camera comes complete with surface and flush mounting options (compatible with a 4S electrical box) and an optional wall/pendant mount kit is available.
In addition to the low-light color performance, the camera will automatically switch to black and white. In this mode, lighting can be complemented with infrared for discreet/covert low-light surveillance with exceptional monochrome images.
A 3D axis gimbal capable of 360 of pan, 180 of tilt and 360 of horizontal rotation simplifies mechanical camera adjustment. The Varifocal Auto Iris lens allows the field of view to be adjusted to suit the scene requirements.
A powerful and intuitive web client allows fine tuning of the camera and the auto iris levels. This can also be performed from most DVR/NVR setup utilities.
The HD3MDIH supports dual video streams and multiple compression formats with frame rates up to 30 frames per second (25 fps for PAL systems). The compression parameters for the two video streams are independently configurable. The primary stream is dedicated to H.264. The secondary stream can be configured for H.264 or MJPEG. The HD3MDIH features analog video out for aiming and focusing during setup.
With built-in low current Power over Ethernet (IEEE 802.3af), power is supplied to the camera using standard network cabling, eliminating the need for a separate power supply and associated wiring. In retrofit situations where PoE support does not exist, the unit can also be powered directly from 24 V AC.
- NTSC video standard
- 3.3-12mm VFAI lens
- Outstanding image quality, 720p (1280 x 720) resolution
- 30 fps (25 fps PAL) progressive scan
- True Day/Night, VFAI lens with removable IR cut filter
- Camera tamper detection
- Video motion detection
- Wall/pendant mount kit available
- Selectable compression formats
- PSIA support
- Dual digital video streams, independently configurable, H.264 and/or H.264/MJPEG
- Remote firmware update
- Supports both dynamic and static IP addresses
- Single model for surface mount and recessed ceiling applications, 4S adapter plate also supplied
- Includes advanced IP locator software to make system setup easy
- Web server for remote setup of camera video and network parameters
- Choice of 24 V AC or PoE IEEE 802.3af power inputs
- Supports input and output alarm contacts
- Supports bidirectional audio
- Video Standard: NTSC
- Scanning System: Progressive scan
- Image Sensor: 1/4" CMOS
- Number of Pixels (H x V): 1280 x 720
- Minimum Illumination: 0.25 lux color/0.22 lux BW @ 50 IRE, F1.6, 0.11 lux color/0.09 lux BW @ 30 IRE, F1.6
- Automatic Lens Control: DC Iris Level 1-25
- Video Output (AUX): 1.0 Vp-p @ 75 ohms
- S/N Ratio: 50 dB or more (AGC off)
- Auto Gain Control: Off/On, selectable (10-40 dB)
- Automatic Electronic Shutter: 1/60-1/24,500 sec
- Lens Type: True Day/Night (TDN) 3.3-12 mm Varifocal Auto Iris, F1.6
- White Balance: AWC, AWC Push, Manual
- Audio/Two-Way: Line in/out
- Input Voltage: 24 V AC, PoE IEEE 802.3af
- Input Range: 17-28 V AC
- Surge Suppression: 1.5 kW transient
- Power Consumption: 3.5 W (max) 24 V AC, PoE: PD Type 1, Class 1
- Dimensions: (W x H) 4.9" x 4.9" (125.1 mm x 124.2 mm)
- Weight: 1.0 lb (0.45 kg) camera only
- Construction: Housing: Polycarbonate, Finish: Matte texture, off white
- Connector: Video Output: 2-pin Molex connector; Power Input: Removable screw block; Network: RJ45 connector; Alarm I/O: Removable screw block; Audio In: Removable screw block; Audio Out: Removable screw block
- Temperature: Operating: -22F to 140F (-30C to 60C), Storage: -40F to 158F (-40C to 70C)
- Relative Humidity: 0% to 85%, non-condensing