Home
Shop by Brands
Dynalock
Dynalock 7023-CYL Keyswitch, Single Gang, Two DPDT Maintained Switches, Mortise Key Cylinder, Satin Stainless Steel

Dynalock 7023-CYL Keyswitch, Single Gang, Two DPDT Maintained Switches, Mortise Key Cylinder, Satin Stainless Steel

MPN: 7023-US32D-CYL
JMAC ID: 200417977

$298.00

JMAC_ID:: 200417977
df_manual_boost:: 1.75

Product Resources

We're here to help

Request a Quote

Low Price Guarantee

The Dynalock 7023-CYL is a keyswitch equipped with two DPDT maintained contacts and a mortise key cylinder with two keys. The unit may be used to control electric locks, shunt or activate security panels/ consoles or any similar requirements. The assembly is supplied with face plate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system. The unit features a satin stainless steel finish.

Also known as: DY-7023US32C, 7023US32DCYL

For more information about the Dynalock 7023-US32D-CYL, please contact us.

Single gang faceplate
Satin stainless steel finish
Two DPDT maintained switches
Mortise key cylinder, 1-1/4” long with cam and two keys
Keyswitch readily accepts any standard 1-1/8” or 1-1/4” long mortise key cylinder fitted with a specified “bat” type cam
Switches are available in momentary functions, with single pole contacts and may be ordered in varying
combinations
Rotating the key to its stop and back to vertical changes the state of the switch contact. To return the contact to its original state this procedure must be repeated. Key is removable in the vertical position
Rotating the key to its stop changes the state of the contact while the key is held in that position. Rotating the key back to vertical returns the switch contact to its original state. Key is removable in the vertical position
Tamper Resistant: All visible screws are spanner head
Switch capacity 6 amps at 125 volts
Are shipped with 6” long factory wired color-coded 18 ga. leads