516-812-0917
Help
Live Chat
Dynalock 3002-VOP2-LED2-US3 Electromagnetic Lock, 1500lbs, Double Outswinging Door, Double Coil, Bright Brass
-
MPN: 3002 VOP2 LED2 US3
-
JMAC ID: 200316747
The Dynalock 3002-VOP2-LED2-US3 is a full size 1500 lbs. holding force electromagnetic lock. It is designed for life safety and high security on rated or nonrated doors and frames. Specify for commercial, industrial, or institutional openings where maximum security and durability is required. The unit features a bright brass finish.
The 3002-VOP2-LED2-US3 is designed for ease of installation with DynaLocks exclusive FasTrak mounting system, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate door contacts.
The 3002-VOP2-LED2-US3 is designed for double outswinging doors. The double coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with a door status switch, a Dynastat force sensor, an anti-tamper switch, relock time delay and a bi-colored LED.
Also known as: 3002VOP2LED2US3
For more information about the Dynalock 3002 VOP2 LED2 US3, please contact us.
The 3002-VOP2-LED2-US3 is designed for ease of installation with DynaLocks exclusive FasTrak mounting system, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate door contacts.
The 3002-VOP2-LED2-US3 is designed for double outswinging doors. The double coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with a door status switch, a Dynastat force sensor, an anti-tamper switch, relock time delay and a bi-colored LED.
Also known as: 3002VOP2LED2US3
Technical Specifications:
|
For more information about the Dynalock 3002 VOP2 LED2 US3, please contact us.
- Lifetime Warranty - American Made in the USA by DynaLock, with over 20 years experience in the manufacture of electromagnetic locks
- One Piece Housing made from high strength aluminum. A seamless housing means maximum resistance to weather and tampering
- FasTrak Mounting: Speed up installation by mounting the FasTrak channel to the frame first. Lock can then be attached and removed with ease
- Universal Design: Lock handing can easily be reversed in the field, allowing placement of the coil adjacent to the vertical jamb where it will exert the most efficient force
- Low power consumption conserves energy, reduces operation cost, and extends battery backup time.
- A totally plated coil and armature provides protection against corrosion
- A narrow backset of 1-1/2” may mean the elimination of other mounting brackets or filler plates
- No residual magnetism - the door releases without delay when lock is de-energized
- Built-in spike suppression protects other solid state components within the system from damage when the lock is de-energized
- 3000 Series - Brochure
- 2050 Instructions
- 2000-3000 Wiring Diagram & Instructions
- 2011 & 3000LC Single Outswing Electromagnetic Lock Instructions
- 3006 Series - Brochure
- 3101BxDYN Series Wiring Diagram
- 1030-RXB SYSTEM KIT Wiring Diagram
- 3002 VOP2 LED2 US3 Data Sheet
- Installation Manual
- 2202-392 Instructions
- 6370 Series Wiring Diagram
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
