516-812-0917
Help
Live Chat
Dynalock 2511-DSM-US19 Mini-Mag Electromagnetic Lock, 650lbs, Single Outswinging Door, Single Coil, Flat Black Coated
-
MPN: 2511 US19 DSM
-
JMAC ID: 200525497
Also known as: 2511US19DSM
Each Dynalock 2511-DSM-US19 electromagnetic lock is comprised of 3 basic components: a lock housing, an electromagnetic coil, and an armature. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The 2511-DSM-US19 is designed for use on single outswinging doors and features a flat black coated finish. The unit is equipped with a door status switch that signals if a door is closed or ajar.
Also known as: 2511US19DSM
For more information about the Dynalock 2511 US19 DSM, please contact us.
Each Dynalock 2511-DSM-US19 electromagnetic lock is comprised of 3 basic components: a lock housing, an electromagnetic coil, and an armature. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The 2511-DSM-US19 is designed for use on single outswinging doors and features a flat black coated finish. The unit is equipped with a door status switch that signals if a door is closed or ajar.
Also known as: 2511US19DSM
Technical Specifications:
|
For more information about the Dynalock 2511 US19 DSM, please contact us.
- Holding Force - 650 lbs. holding force provides for effective traffic control. Examples include interior office doors, clean room interlocks, tool cribs, and x-ray areas.
- 4 Operating Voltages - 12 or 24 VDC or VAC for installation flexibility and to reduce stock.
- Mounts to the underside of the frame header
- Single coil
- Door status switch - signals if a door is closed or ajar
- Flat black coated finish
- Single outswinging door
- Built-In Spike Suppression protects other solid state components within the system from damage when the lock is de-energized.
- Narrow Backset - A thin lock section (1-1/4”) may mean the elimination of additional mounting brackets.
- No Residual Magnetism - The lock releases without delay when de-energized.
- A Totally Plated Coil and armature provides protection against corrosion.
- Low Power Consumption conserves energy, reduces operating cost, and extends battery backup time.
- 2013 Instructions
- 2012xTJ21 / 3001LCxTJ21 Instructions
- 2011-390 Installation Manual
- 2013 Series 1200 Lbs. Electromagnetic Gate Lock Holding Force
- 4951 Series Dimensional Drawing
- 2000 Series 1200 Lbs. Holding Force Electromagnetic Locks
- 2011 & 3000LC Single Outswing Electromagnetic Lock Instructions
- 2011xTJ20 / 3000LCxTJ20 Instructions
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
