516-812-0917
Help
Live Chat
Expedited Shipping Available
Dynalock 2011-US4 Electromagnetic Lock, 1200lbs, Single Outswinging Door, Satin Brass
-
MPN: 2011 US4
-
JMAC ID: 200316532
The Dynalock 2011-US4 is a full size 1200 lbs. holding force electromagnet. It is designed for life safety and high security on rated or nonrated doors and frames. Specify for commercial, industrial, or institutional openings when low cost and high security are required. The unit features a satin brass finish.
The 2011-US4 lock is designed for ease of installation with adjustable mounting, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate "door contacts".
The 2011-US4 is designed for a single outswinging door. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
Also known as: 2011US4
For more information about the Dynalock 2011 US4, please contact us.
The 2011-US4 lock is designed for ease of installation with adjustable mounting, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate "door contacts".
The 2011-US4 is designed for a single outswinging door. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
Also known as: 2011US4
Technical Specifications:
|
For more information about the Dynalock 2011 US4, please contact us.
- Single outswinging door
- Single coil
- Satin brass finish
- Internal wiring compartment includes built-in circuit board attached to access cover to provide a convenient, plug in, concealed area for wiring connections
- Low power consumption conserves energy, reduces operation cost, and extends battery backup time
- A totally plated coil and armature provides protection against corrosion
- A narrow backset of 1-1/2” may mean the elimination of other mounting brackets or filler plates
- No residual magnetism - the door releases without delay when lock is de-energized.
- Multiple sensor and monitor options increases flexibility, security and compatibility with system equipment
- Built-in spike suppression protects other solid state components within the system from damage when the lock is de-energized
- Lifetime Warranty - American Made in the USA by DynaLock, with over 20 years experience in the manufacture of electromagnetic locks
- 2011 US4 Data Sheet
- Installation Manual
- 2282-TJ82 Instructions
- 2280 Instructions
- 2500 x LCB Series Wiring Diagram & Instructions
- 2500 & 2280 Series Wiring Diagram & Instructions
- 2050 Instructions
- 2202-392 Instructions
- 2268 Instructions
- 2268-TJ10 Instructions
- 2268xDSE Instructions
- 2513/2513 GLB Instructions
- 2585 Instructions
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
