Home
Shop by Brands
Dynalock
Electromagnetic Locks
650 LB Holding Force
Dynalock 2511TJ-DSM-DYN-US3 Mini-Mag Electromagnetic Lock, 650lbs, Single Inswinging Door, Single Coil, Bright Brass

Dynalock 2511TJ-DSM-DYN-US3 Mini-Mag Electromagnetic Lock, 650lbs, Single Inswinging Door, Single Coil, Bright Brass

MPN: 2511TJ US3 DSM DYN
JMAC ID: 200316638

$838.00

JMAC_ID:: 200316638
df_manual_boost:: 1.75

Product Resources

We're here to help

Request a Quote

Low Price Guarantee

Each Dynalock 2511TJ-DSM-DYN-US3 electromagnetic lock is comprised of 3 basic components: a lock housing, an electromagnetic coil, and an armature. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.

The 2511TJ-DSM-DYN-US3 is designed for use on single inswinging doors and features a bright brass finish. The unit is equipped with a door status switch and Dynastat force sensor.

Also known as: 2511TJUS3DSMDYN

Technical Specifications:

Finish Description: Bright Brass
Finish: 605/US3
Series: DynaLock 2000 Series Maglocks

For more information about the Dynalock 2511TJ US3 DSM DYN, please contact us.

Door status switch - signals if a door is closed or ajar
Low Power Consumption conserves energy, reduces operating cost, and extends battery backup time.
A Totally Plated Coil and armature provides protection against corrosion.
Single coil
Single inswinging door
No Residual Magnetism - The lock releases without delay when de-energized.
Narrow Backset - A thin lock section (1-1/4”) may mean the elimination of additional mounting brackets.
Built-In Spike Suppression protects other solid state components within the system from damage when the lock is de-energized.
Holding Force - 650 lbs. holding force provides for effective traffic control. Examples include interior office doors, clean room interlocks, tool cribs, and x-ray areas.
Bright brass finish
Dynastat force sensor - indicates an efficient magnetic bond
4 Operating Voltages - 12 or 24 VDC or VAC for installation flexibility and to reduce stock.
Mounts to the face of the frame header