516-812-0917
Help
Live Chat
Dynalock 2268-20-DSM2-DYN2-RC2 Low Profile Electromagnetic Lock, 1200lbs, Double Outswinging Door, Double Coil, Satin Aluminum
-
MPN: 2268-20 DSM2 DYN2 RC2
-
JMAC ID: 200316602
The Dynalock 2268-20-DSM2-DYN2-RC2 is a full size 1200 lb. holding force electromagnet. It is designed for life safety and high security on rated or nonrated doors and frames. With a low 2 profile, the 2268 is perfect for opening heights of 7 or less to facilitate code compliance on designated egress doors.
The 2268-20-DSM2-DYN2-RC2 is field selectable for 12VDC or 24VDC. Specify the RC option for AC voltage operation. Surge suppression is built-in and 12 long color coded wire leads are provided for easy installation. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate door contacts.
The 2268-20-DSM2-DYN2-RC2 is designed for double outswinging doors. The double coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with a door status switch, a Dynastat force sensor and a rectifier for AC operation.
Also known as: 226820DSM2DYN2RC2
For more information about the Dynalock 2268-20 DSM2 DYN2 RC2, please contact us.
The 2268-20-DSM2-DYN2-RC2 is field selectable for 12VDC or 24VDC. Specify the RC option for AC voltage operation. Surge suppression is built-in and 12 long color coded wire leads are provided for easy installation. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate door contacts.
The 2268-20-DSM2-DYN2-RC2 is designed for double outswinging doors. The double coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with a door status switch, a Dynastat force sensor and a rectifier for AC operation.
Also known as: 226820DSM2DYN2RC2
For more information about the Dynalock 2268-20 DSM2 DYN2 RC2, please contact us.
- Door status switch - indicates if a door is closed or ajar
- Mounts to underside of frame header
- Double coil
- Dynastat Force Sensor - indicates an efficient magnetic bond
- Double outswinging door
- Rectifier for AC operation - Allows 12/24 VAC voltage input
- Satin aluminum finish
- Non-Handed includes a convenient area for wiring connections on each end of the lock
- Adjustable mounting base reduces installation time and insures proper alignment
- Low power consumption conserves energy, reduces operation cost, and extends battery backup time
- A totally plated coil and armature provides protection against corrosion
- No residual magnetism - the lock releases without delay when de-energized
- Multiple monitoring options increases the flexibility security and compatibility of system equipment
- Low profile provides maximum clearance for underheight door openings. The lowest profile for ANY full size electromagnetic lock
- Built-in spike suppression protects other solid state components within the system from damage when the lock is de-energized
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
