516-812-0917
Help
Live Chat
Dynalock 2012-US28
-
MPN: 2012-US28
-
JMAC ID: 200226548
The Dynalock 2012-US28 is a electromagnetic lock designed for a double outswinging door. The lock has a holding force of 1200 lbs, a single coil with a double armiture and a satin aluminum finish. The unit mounts to the underside of the frame header.
The 2012-US28 is recommended for traffic control only. Specify for commercial, industrial, or institutional openings when low cost and high security are required.
All 2000 Series locks are designed for ease of installation with adjustable mounting, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate door contacts.
The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
UPC: 999999437067
Also known as: DY-2012US28, 2012US28
For more information about the Dynalock 2012-US28, please contact us.
The 2012-US28 is recommended for traffic control only. Specify for commercial, industrial, or institutional openings when low cost and high security are required.
All 2000 Series locks are designed for ease of installation with adjustable mounting, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate door contacts.
The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
UPC: 999999437067
Also known as: DY-2012US28, 2012US28
For more information about the Dynalock 2012-US28, please contact us.
- A narrow backset of 1-1/2” may mean the elimination of other mounting brackets or filler plates
- No residual magnetism - the door releases without delay when lock is de-energized
- Multiple sensor and monitor options increases flexibility, security and compatibility with system equipment
- lock is de-energized
- Internal wiring compartment includes built-in circuit board attached to access cover to provide a convenient, plug in, concealed area for wiring connections
- Low power consumption conserves energy, reduces operation cost, and extends battery backup time
- A totally plated coil and armature provides protection against corrosion
- Lifetime Warranty - American Made in the USA by DynaLock, with over 20 years experience in the manufacture of electromagnetic locks
- Built-in spike suppression protects other solid state components within the system from damage when the
Other products from Dynalock
