516-812-0917
Help
Live Chat
ComNet FVR8018M1 Video Receiver/Data Transreceiver, Multimode, 1550/1310nm, 8 Channel Digital Video, 8 Bi-Directional Data Channels, 10-Bit Digital Short-Haul Video
-
MPN: FVR8018M1
-
JMAC ID: 200375535
The ComNet FVT/FVR8018(M,S)1 Series transmits eight (8) channels of 10-Bit Digitally Encoded video along with eight (8) channels of bi-directional data over one single mode or multimode optical fiber. The video quality exceeds RS-250C for short-haul video transmission. This equipment is environmentally hardened and suitable for use in unconditioned roadside or out-of plant installations. The FVT/FVR8018 is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-direction RS232, 422 and 485-2/4W data. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are required. Bi-Color (RED/GREEN) LED indicators are provided to indicate the status of the system, video and data. These units are interchangeable between stand-alone or card mount configurations.
Also known as: C4-FVR8018M1, CCN-FVR8018M1
For more information about the ComNet FVR8018M1, please contact us.
Also known as: C4-FVR8018M1, CCN-FVR8018M1
For more information about the ComNet FVR8018M1, please contact us.
- Lifetime Warranty
- Interchangeable between stand-alone or rack mount use – ComFit
- Hot-swappable rack modules
- Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
- Robust design ensures extremely high reliability in unconditioned out-of-plant environments
- Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events.
- Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
- camera systems
- Compatible with all NTSC, PAL, or SECAM CCTV
- transmission
- Exceeds all requirements for EIA RS-250C short-haul
- Supports RS232, RS422, and 2 or 4-wire RS485
- 10-bit digital video transmission: transmits 8 real-time color video signals and 8 bi-directional data signals on one optical fiber
- 1550/1310nm
- Multimode
- Video Receiver/Data Transreceiver
Other products from ComNet
Customer Reviews
(No reviews yet)
Write a Review
