Home
Shop by Brands
ComNet
ComNet CNFE1003M2 10/100Mbps Ethernet Electrical to Optical Media Converter, Standard, DC, 1310nm, SC Connector, 2 Fibers, Multimode

ComNet CNFE1003M2 10/100Mbps Ethernet Electrical to Optical Media Converter, Standard, DC, 1310nm, SC Connector, 2 Fibers, Multimode

MPN: CNFE1003M2
JMAC ID: 200225269

$504.06

JMAC_ID:: 200225269
df_manual_boost:: 1.75

Product Resources

CNFE1003M2 Data Sheet

We're here to help

Request a Quote

Low Price Guarantee

The ComNet Ethernet CNFE100X media converter series are one-channel Ethernet electrical to optical media converters. These auto-negotiating devices accept a 10/100Mbps electrical input and convert this to a 100 Mbps optical output. This series of media converters use multimode and single-mode optical fiber and one and two fiber SC and ST optical connectors. LED indicators confirm operational status. All models are environmentally hardened with no electrical or optical adjustments (Plug and Play). Packaged in the exclusive ComNet ComFit housing, the standard size units may be either wall or rack mounted. Models within the series are also available in a small size. The units are powered by an included 8-15VDC power supply.

UPC: 845770001037
Also known as: C4-CNFE13M2, CCN-CNFE1003M2

Technical Specifications:

Package Contents: CNFE1003M2 Media ConverterPower Supply
Country of Origin: United States
Limited Warranty: Lifetime
Width (mm): 63.5
Height (mm): 83.82
Form Factor: Wall Mountable
Depth (mm): 27.94
Product Series: CNFE100
Product Type: Transceiver/Media Converter
Width: 2.5"
Height: 3.3"
Depth: 1.1"

For more information about the ComNet CNFE1003M2, please contact us.

Standard size is interchangeable between stand-alone or rack mount use – ComFit
Lifetime Warranty
IEEE 802.3 compliant
Standard size is hot-swappable rack module
LED Indicators
No in-field optical adjustments required
Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and CALTRANS Traffic Signal Control Equipment Specifications
Transparent to data encoding/compatible with major data protocols
Distances up to: 3 km (2 mi) Multimode; 20 km (12 mi) Single Mode
Automatic MDI/MDI-X crossover
Optical port supports 100 Mbps full duplex data
Electrical port supports Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data.
10/100 Mbps Ethernet: 10/100 BASE-T/TX electrical port; 100 BASE-FX optical port
1310nm wavelength
DC powered
2 fiber design
SC optical connectors
Multimode
Standard size