516-812-0917
Help
Live Chat
ComNet CNFE6+2USPOE-S 8 Port 10/100 Mbps Ethernet Self-Managed Switch, 2FX Single Mode, 6TX (PoE)
-
MPN: CNFE6PLUS2USPOES
-
JMAC ID: 200275076
The ComNet CNFE6+2USPOE provides 8 Ethernet ports operating at 10/100 Mbs and is designed to combine six electrical ports plus one optical port into a second optical port that forwards this data to the next CNFE6+2USPOE. The optical ports are designed to forward the data from the six electrical ports to the next switch, to a PC, or another Ethernet connection. In addition, the electrical ports can supply up to thirty (30) watts of power (Power Over Ethernet) to remote Ethernet devices. This product uses ST optical connections and can be supplied to operate over Singlemode or Multimode optical fiber.
There is no programming required to use this product. The product comes pre-programmed with IEEE 802.1x based VLAN management functionality, preventing network video flooding. It is Plug-and-Play. The sixth (6th) electrical port can be used to monitor the data flow from the optical port to permit local observation and diagnostics of the equipment. LED indicators confirm the operating status of this device. The ComNet CNFE6+2USPOE may be either wall mounted, rack mounted (ComFit packaging) or DIN-rail mounted with the use of the ComNet DINBKT1 adapter.
For more information about the ComNet CNFE6PLUS2USPOES, please contact us.
There is no programming required to use this product. The product comes pre-programmed with IEEE 802.1x based VLAN management functionality, preventing network video flooding. It is Plug-and-Play. The sixth (6th) electrical port can be used to monitor the data flow from the optical port to permit local observation and diagnostics of the equipment. LED indicators confirm the operating status of this device. The ComNet CNFE6+2USPOE may be either wall mounted, rack mounted (ComFit packaging) or DIN-rail mounted with the use of the ComNet DINBKT1 adapter.
For more information about the ComNet CNFE6PLUS2USPOES, please contact us.
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
- No in-field optical adjustments required
- Power, Activity and Port PoE status LED indicators
- IEEE 802.3 compliant
- Lifetime Warranty
- IEEE802.3af Class 1 – 3 Power over Ethernet (PoE) 30W
- Optical port supports 100 Mbps full duplex data
- Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data.
- 10/100 Mbps Ethernet: 10/100 BASE-T/TX electrical port; 100 BASE-FX optical port
- No Programming Required
- Single mode
- Automatic MDI/MDI-X crossover
- Hot-swappable rack modules
- The ComNet CNFE6+2USPOE may be either wall mounted, rack mounted (“ComFit” packaging) or DIN-rail mounted with the use of the ComNet DINBKT1 adapter.
- Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events.
Other products from ComNet
Customer Reviews
(No reviews yet)
Write a Review
