ComNet CNFE5SMS 5-Port 10/100 Mbps Ethernet Self-Managed Switch, Up to 100m

  • MPN: CNFE5SMS
  • JMAC ID: 200275074
$757.00
JMAC_ID:
200275074
df_manual_boost:
1.75
The ComNet CNFE5SMS is a five-port self-managed Ethernet switch with uplink management functionality. It provides 5ports operating at 10/100Mbs and is designed to combine Ethernet data from the four electrical ports into a fifth electrical port and forward that data to the next network device. There is no programming required to use this switch. The ComNet CNFE5SMS comes pre-programmed, preventing network video flooding with DIP switch selection of port 5 as uplink or as an unmanaged switch. It is Plug-and-Play easy to use. LED indicators confirm the operating status of this device. The ComNet CNFE5SMS may be either wall mounted, rack mounted (ComFit packaging) or DIN rail mounted with the use of the ComNet DINBKT1 adapter.

UPC: 845770009101
Also known as: C4-CNFE5SMS, CCN-CNFE5SMS

Technical Specifications:
  • Package Contents: 10/100TX 5TX Ethernet Self-managed SwitchDC Plug-in Power Supply
  • Depth: 5.3"
  • Height: 6.1"
  • Width: 1.1"
  • Country of Origin: United States
  • Environmental Certification: RoHS, WEEE
  • Environmentally Friendly: Yes
  • Limited Warranty: Lifetime
  • Form Factor: Rack-mountable, Rail-mountable, Wall Mountable
  • PoE (RJ-45) Port: No
  • Stack Port: No
  • Port/Expansion Slot Details: 5 x Fast Ethernet Network
  • Media Type Supported: Twisted Pair
  • Depth (mm): 134.62
  • Product Type: Ethernet Switch
  • Height (mm): 154.94
  • Width (mm): 27.94
  • Power Source: Power Supply
  • Uplink Port: Yes
  • Network Technology: 10/100Base-TX
  • Ethernet Technology: Fast Ethernet
  • Layer Supported: 2
  • Total Number of Network Ports: 5


For more information about the ComNet CNFE5SMS, please contact us.
  • No Programming Required
  • IEEE 802.3 compliant
  • LED array displays unit operational status along with received signal strength
  • Lifetime Warranty
  • Interchangeable between stand-alone or rack mount use – ComFit
  • Hot-swappable rack modules
  • Power and Activity status LED indicators
  • 10/100 Mbps Ethernet: 5 10/100 BASE-T(X) electrical ports
  • Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
  • Pre-programmed Port for uplink to other Ethernet devices
  • Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
  • Automatic MDI/MDI-X crossover
  • Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data.
Live Chat