ComNet CNFE5SMSPOE 10/100TX 5TX Ethernet Self-Managed Switch with PoE

  • MPN: CNFE5SMSPOE
  • JMAC ID: 200225286
$985.00
JMAC_ID:
200225286
df_manual_boost:
1.75
The ComNet CNFE5SMSPOE is a five-port self-managed Ethernet switch with uplink management functionality. It provides 5 ports operating at 10/100Mbs and is designed to combine Ethernet data from the four electrical ports into a fifth electrical port and forward that data to the next network device. There is no programming required to use this product. The ComNet CNFE5SMSPOE comes pre-programmed, preventing network video flooding with a switch selection that allows the switch to be used as an uplink or as an unmanaged switch. Ports 14 can supply up to thirty (30) watts of power (Power over Ethernet) and incorporate PoE+ features based on the IEEE 802.3at standard. It is Plug-and-Play easy to use. LED indicators confirm the operating status of this device. The ComNet CNFE5SMSPOE may be either wall mounted, rack mounted (ComFit packaging) or DIN-rail mounted with the use of the ComNet DINBKT1 adapter.

UPC: 999999419771
Also known as: C4-CNFE5SMSP, CCN-CNFE5SMSPOE

Technical Specifications:
  • Height: 1.1"
  • Depth: 5.3"
  • Depth (mm): 134.62
  • Modular: No
  • Port/Expansion Slot Details: 5 x Fast Ethernet Network
  • Environmentally Friendly: Yes
  • Environmental Certification: RoHS, WEEE
  • Country of Origin: United States
  • Input Voltage: 48 V DC
  • Width (mm): 154.94
  • Limited Warranty: Lifetime
  • Height (mm): 27.94
  • Power Source: Power Supply
  • Form Factor: Rack-mountable, Rail-mountable, Wall Mountable
  • Total Number of Network Ports: 5
  • Layer Supported: 2
  • Ethernet Technology: Fast Ethernet
  • Network Technology: 10/100Base-TX
  • Manageable: Yes
  • Uplink Port: No
  • Media Type Supported: Twisted Pair
  • Product Type: Ethernet Switch
  • PoE (RJ-45) Port: No
  • Input Voltage (V DC): 48
  • Width: 6.1"


For more information about the ComNet CNFE5SMSPOE, please contact us.
  • Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data.
  • Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and CALTRANS Traffic Signal Control Equipment Specifications
  • Automatic MDI/MDI-X crossover
  • Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events.
  • Power and Activity status LED indicators
  • Hot-swappable rack modules
  • Interchangeable between stand-alone or rack mount use – ComFit
  • received signal strength
  • 10/100 Mbps Ethernet: 5 10/100 BASE-T/TX electrical ports; Ports 1–4 support PoE+
  • IEEE 802.3 compliant
  • Pre-programmed Port for uplink to other Ethernet devices
  • Lifetime Warranty
  • LED array displays unit operational status along with
  • No Programming Required
Live Chat