Home
Shop by Brands
ComNet
ComNet CNFE4FX2TX2US 4 Port 100 Mbps Ethernet Unmanaged Switch with 2 TX RJ45 Ports and 2 FX SFP Ports

ComNet CNFE4FX2TX2US 4 Port 100 Mbps Ethernet Unmanaged Switch with 2 TX RJ45 Ports and 2 FX SFP Ports

MPN: CNFE4FX2TX2US
JMAC ID: 200225427

$332.00

JMAC_ID:: 200225427
df_manual_boost:: 1.75

Product Resources

CNFE4FX2TX2US Data Sheet

We're here to help

Request a Quote

Low Price Guarantee

The ComNet CNFE4US Ethernet 4 port unmanaged switch Series is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP options or 10/100 Mbps data over CAT5E/6 electrical cable. This unit integrates 4 independent 10/100 Mbps channels in a single package. The CNFE4FX2TX2US and CNFE4FX4US require the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors. The CNFE4FX2TX2US and CNFE4TX4US electrical interfaces will Auto-Negotiate to 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interfaces operate at a 100 Mbps Ethernet rate. All models are environmentally hardened to operate in demanding environments. LED indicators are provided for confirming equipment operating status. These units are interchangeable between stand-alone or card mount configurations.

UPC: 845770001792
Also known as: CCN-CNFE4FX2TX2US, C4-FE4F2T2US

For more information about the ComNet CNFE4FX2TX2US, please contact us.

Lifetime Warranty
2 TX RJ ports and 2 FX SFP ports
10/100 Mbps Ethernet: 10/100 BASE-T/TX electrical port; 100 BASE-FX optical port
Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data.
Optical port supports 100 Mbps full duplex data
Automatic MDI/MDI-X crossover
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Uses interchangeable SFP for fiber type, distance and connector (Ordered separately)
Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
No in-field optical adjustments required
Power, Activity and Port status LED indicators
Hot-swappable rack modules
Interchangeable between stand-alone or rack mount use – ComFit
IEEE 802.3 compliant