Bosch B8512G IP Control Panel, 8 Areas, 99 Points
-
MPN: B8512G
-
JMAC ID: 200618534
The Bosch B8512G is a G Series IP security control panel supporting up to 99 detection points, 8 independently controlled areas, and 8 access-controlled doors for commercial intrusion, fire, and access control systems. It features built-in 10/100 Ethernet communication, supports up to 500 authorized users, and accommodates wired and wireless detection devices through compatible expansion modules. The B8512G also provides 3 onboard programmable outputs, up to 93 total outputs, a 2,048-event history log, and optional cellular or telephone communication for central station alarm reporting.
Bosch B8512G G Series 99-Point IP Intrusion and Access Control Panel
The Bosch B8512G is a commercial security control panel designed to integrate intrusion detection, compatible fire alarm functions, and electronic access control into a single programmable system. Part of the Bosch G Series, the B8512G supports up to 99 individually identified detection points, 8 independently controlled areas, and 8 access-controlled doors, allowing businesses to manage security across multiple departments, entrances, and protected zones. Its expandable architecture accommodates compatible hardwired and wireless intrusion devices, including motion detectors, magnetic contacts, glass-break sensors, and supervised alarm inputs. The panel also supports up to 500 authorized users, enabling individually assigned credentials and access permissions across protected areas. Designed for offices, retail facilities, warehouses, educational institutions, and other commercial properties, the B8512G provides centralized security management while allowing different building areas to maintain independent arming schedules and operating procedures.
The B8512G incorporates a built-in 10/100BASE-T Ethernet interface for Bosch Conettix IP alarm communication, remote programming, and network-based system integration. Its network interface supports IPv4 and IPv6 communication, while optional plug-in PSTN and cellular communication modules provide additional paths for reporting alarm, supervisory, and trouble conditions to compatible monitoring receivers. The panel supports up to 93 programmable outputs, including 3 onboard outputs, allowing installers to configure audible notification, auxiliary signaling, equipment control, and other automation functions through compatible expansion modules. Additional system capabilities include 63 point profiles, 8 programmable custom functions, 40 scheduled events (SKEDs), and a 2,048-event history log. Programmable point responses, cross-point verification, alarm verification, selectable end-of-line resistor values, and configurable output profiles support application-specific intrusion and fire alarm requirements. The B8512G also provides event reporting and system supervision capabilities for installations requiring detailed records of user activity and security events.
The Bosch B8512G supports expansion through the Bosch SDI2 communication bus, allowing installers to connect compatible keypads, input modules, output modules, wireless receivers, and access control interfaces. The panel supports up to 16 supervised keypads for local system operation and status monitoring, with compatible options including the Bosch B920, B930, and B94x keypad families. The optional B208 eight-input expansion module adds supervised detection points, while the B308 eight-output expansion module provides additional programmable relay outputs. Access control integration is available through the B901 Access Control Module, supporting up to eight controlled doors when the required modules, readers, and locking hardware are installed. The panel can also integrate with compatible Bosch RADION and Inovonics wireless devices through the appropriate receiver or interface modules. Bosch Remote Programming Software (RPS) supports comprehensive local and remote system configuration, account management, firmware maintenance, and diagnostic operations, while the onboard USB connection provides direct programming access for installers.
The Bosch B8512G operates from a 16.5-18 VAC transformer input and provides nominal 12 VDC power for the control panel and compatible peripherals. The panel draws approximately 180-260 mA during normal operation and supports up to 1,400 mA of auxiliary output current, subject to the overall system power budget and installation configuration. The control board measures 10.625 inches high, 7.75 inches wide, and 1.875 inches deep and is designed for installation in a compatible Bosch security control panel enclosure with an appropriately sized standby battery. Its operating temperature range of 32 F to 120 F (0 C to 49 C) supports indoor commercial security installations. The B8512G carries manufacturer-documented approvals for applicable UL 365, UL 609, UL 636, UL 1023, UL 1076, UL 1610, UL 1635, and UL 2572 applications, with additional certifications depending on the installation and system configuration. The panel is also identified as a replacement platform for legacy Bosch D7412G, D7412GV2, D7412GV3, and D7412GV4 control panels. Compared with the higher-capacity Bosch B9512G, which supports up to 599 detection points and 32 areas, the B8512G provides a more compact 99-point platform for commercial facilities requiring integrated intrusion detection, network communication, expandable access control, and centralized system administration.
Also known as: BOS-B8512G
For more information about the Bosch Security B8512G, please contact us.
- Fully integrated intrusion, fire, and access control allows users to interface with one system instead of three
- Provides up to 99 points using a combination of hardwired or wireless devices for installation flexibility, and up to 8 areas and 8 doors for up to 500 users
- Remote Security Control app which allows users to control their security systems - and view system cameras - remotely from mobile devices such as phones and tablets
- Installer-friendly features for simple installation and communications, including plug-in PSTN and cellular communication modules
- On-board Ethernet port for Conettix IP alarm communication and remote programming, compatible with modern IP networks including IPv6/IPv4, Auto-IP, and Universal Plug and Play
1 Review
-
BOSCH-B8512G