Bosch DS150i Request-to-Exit PIR Motion Detector for Access Control Systems
-
MPN: DS150I
-
JMAC ID: 200011931
The Bosch DS150i is a passive infrared (PIR) request-to-exit motion detector with an 8 x 10-foot detection area, two Form C relay contacts, and selectable fail-safe or fail-secure operation for commercial access control systems. It operates on 12 or 24 VAC/DC, features an adjustable relay activation timer of up to 60 seconds, and supports wall or ceiling mounting. The light gray detector includes a visible activation LED, adjustable and maskable coverage, and UL 294 access control listing for compatible indoor installations.
Bosch DS150i Request-to-Exit PIR Motion Detector with Dual Form C Relays
The Bosch DS150i is a passive infrared request-to-exit (REX) motion detector designed to initiate door release when an occupant approaches an access-controlled exit. Part of the Bosch DS150i Series, the detector monitors movement near a secured doorway and signals compatible access control panels or electric door control equipment through its integrated relay contacts. It provides a typical 8-foot by 10-foot (2.4 x 3 m) detection pattern with wrap-around coverage designed for single-door and double-door applications. The DS150i features a light gray enclosure suitable for commercial offices, retail facilities, educational buildings, institutional properties, and other indoor access-controlled environments. Its automatic motion detection allows users to request door release without presenting a credential or manually operating a separate request-to-exit button, subject to the installed access control system's configuration.
The Bosch DS150i operates on 12 or 24 VAC/DC power and draws approximately 26 mA at 12 VDC under the manufacturer's published operating conditions. It incorporates two Form C (SPDT) relay contact sets for signaling compatible access control equipment or interfacing with appropriately rated electric locking circuits. One relay contact set includes electromagnetic interference protection for inductive loads, while the other provides a separate switching connection for compatible control applications. The detector features a field-adjustable relay latch timer of up to 60 seconds, with selectable resettable and non-resettable timing modes. In resettable mode, additional detected motion extends the activation interval, while non-resettable operation allows the relay to return to its normal state after the programmed period even if motion continues. The DS150i also provides programmable fail-safe or fail-secure relay behavior during power loss, allowing installers to configure the switching response according to the connected access control equipment and applicable egress requirements. An externally visible LED provides immediate confirmation of motion detection and relay activation during installation and testing.
The DS150i features a high-impact ABS plastic housing measuring 6.25 inches long, 1.5 inches wide, and 1.5 inches deep (159 x 38 x 38 mm), supporting surface mounting above an access-controlled doorway on either a wall or ceiling. Its internally adjustable PIR detection assembly allows installers to aim the sensing pattern toward the intended exit approach area, while optional masking reduces unwanted detection outside the controlled zone. The detector's wrap-around coverage supports door configurations where occupants may approach from different angles, including paired-door installations. The manufacturer specifies a typical coverage area of 8 x 10 feet, with placement, mounting height, and internal adjustment determining the effective detection pattern. The DS150i supports installation at appropriate mounting heights above the door and can be fitted with the optional Bosch TP160 light gray trim plate when mounting over a standard single-gang electrical box. Its compact enclosure and accessible wiring connections support integration with new access control systems and replacement of compatible existing request-to-exit sensors.
The Bosch DS150i is designed for commercial access-controlled doors equipped with compatible electromagnetic locks, electric strikes, and electronic door control systems that require a motion-activated request-to-exit input. Its configurable relay timing and power-loss response provide flexibility for applications involving offices, secured interior corridors, retail entrances, educational facilities, and other electronically controlled openings. The detector operates in ambient temperatures from -20 F to +120 F (-29 C to +49 C), although installations requiring UL compliance must follow the more restrictive conditions stated in the applicable listing and installation instructions. The DS150i is UL 294 Listed for access control system applications, with applicable Canadian ULC-S319 recognition documented by Bosch. The standard DS150i features a light gray enclosure, while the DS151i provides the corresponding black enclosure. Compared with the higher-performance Bosch DS160, the DS150i provides basic motion-activated exit detection without the DS160's additional door monitoring, audible sounder, and sequential logic features. The DS150i is not intended to serve as the sole or primary means of emergency egress; the complete locking system must include the required code-compliant release methods. Its dual relay contacts, adjustable detection coverage, selectable timing modes, and compact indoor construction make it suitable for professionally installed request-to-exit applications.
UPC: 782695276068
Also known as: DS-DS150I, BOS-DS150I
Technical Specifications:
|
For more information about the Bosch Security DS150I, please contact us.
- Internal vertical pointability
- Wall or ceiling mountable
- Single or double door use
- Gray Enclosure
- Selectable relay trigger mode
- Wrap-around coverage pattern
2 Reviews
-
BOSCH-DS150I
-
BOSCH-DS150I