Bosch Security
The Bosch B308 is an SDI2 8-output expansion module designed to add programmable relay outputs to compatible Bosch intrusion and fire alarm control panels. Featuring 8 Form C dry-contact relays rated from 0.001 to 1.0A at 5-24 VDC, it supports auxiliary equipment control, alarm annunciation, and building system integration. The supervised module operates on 12 VDC nominal power with a maximum current draw of 150 mA and communicates through the Bosch SDI2 bus. Onboard address switches, screw terminals, and a status LED simplify installation, programming, and diagnostics.
The Bosch B308 SDI2 8-Output Expansion Module expands the programmable output capacity of compatible Bosch intrusion and fire alarm control panels. Also known as the Bosch Octo-output Module, the B308 provides 8 independently programmable Form C relay outputs that can respond to alarm conditions, system trouble events, individual protection point faults, and commands from authorized keypad users. Each relay provides normally open (NO), normally closed (NC), and common (COM) contacts, enabling connections to external monitoring equipment and auxiliary control circuits. The module communicates with the host control panel through the Bosch SDI2 serial data bus, receiving commands and activating its relays according to programmed output functions. Typical applications include remote alarm annunciation, HVAC control interfaces, electric door lock release signaling, and stairwell pressurization control in appropriately designed building security systems.
The B308 features 8 dry-contact relays rated for resistive loads from 0.001 to 1.0A at 5-24 VDC, allowing each output to switch a compatible external circuit without supplying operating power to the connected equipment. The module operates at 12 VDC nominal and consumes approximately 22 mA for its digital circuitry, plus 16 mA for each energized relay, with a manufacturer-specified maximum current draw of 150 mA. Integrated rotary address switches establish a unique SDI2 device address, while a blue heartbeat LED provides visual module status and diagnostic information. An onboard tamper connector accepts a compatible optional enclosure tamper switch. The module measures 2.9 inches high, 5.0 inches wide, and 0.60 inches deep (73.5 x 127 x 15 mm), weighs approximately 5 oz (0.14 kg), and operates at temperatures from 32 F to 120 F (0 C to 49 C) with relative humidity from 5% to 93% under specified conditions.
The Bosch B308 is compatible with B9512G, B8512G, B6512, B5512, B4512, and supported D9412GV4, D7412GV4, and D7212GV4 control panels. Manufacturer-documented expansion limits include up to 59 B308 modules on a B9512G, 9 on a B8512G or B6512, 5 on a B5512, and 3 on a B4512, subject to the panel's total output capacity and configuration. Each B308 connects to the control panel using PWR, A, B, and COM SDI2 connections through its screw terminal strip or the included interconnect cable. Terminal connections accommodate 12-22 AWG conductors, with supported SDI2 wiring distances of up to 400 ft using 22 AWG or 1,000 ft using 18 AWG unshielded wire. The module mounts inside a compatible Bosch control panel enclosure or a separate D203 remote enclosure. Up to 4 modules can occupy the standard enclosure mounting pattern, while additional mounting configurations use the optional D137 mounting bracket. The package includes the B308 module, mounting hardware pack, interconnect cable, and installation instructions.
The Bosch B308 programmable relay expansion module supports commercial security, industrial monitoring, institutional facilities, and approved fire alarm system applications requiring additional controlled outputs. Each relay can be programmed independently to respond to system alarms, supervisory conditions, trouble events, individual point changes, or authorized manual commands, enabling integration with remote annunciators, auxiliary signaling devices, HVAC interfaces, and compatible door control equipment. The B308 is a supervised output expansion device rather than an input expansion module, distinguishing it from the Bosch B208 8-Input Expansion Module, which adds hardwired protection points to supported panels. Bosch documents regulatory compliance for applicable configurations under UL 864, UL 985, UL 1023, UL 1076, UL 1610, and Canadian ULC standards. Fire alarm installations requiring UL 864 compliance must use an approved commercial fire alarm control panel and compatible system configuration. Installers must verify relay load ratings, total SDI2 current consumption, enclosure requirements, and output programming before connecting auxiliary equipment.
Technical Specifications:
|
Bosch Security
Bosch Security
Bosch Security
Posted by 167888 on Mar 7th 2021