Home
Shop by Brands
Altronix
Altronix AL300ULM Multi-Output Power Supply w/Fire Alarm Disconnect

Altronix AL300ULM Multi-Output Power Supply w/Fire Alarm Disconnect

MPN: AL300ULM
JMAC ID: 200011628

$294.00

JMAC_ID:: 200011628
df_manual_boost:: 1.75

Product Resources

We're here to help

Request a Quote

Low Price Guarantee

The AL300ULM multi-access control power supply/charger converts 115VAC/60Hz input into five Class 2 rated power limited 12VDC or 24VDC outputs, expanding routing options to all of your access control systems and related access control equipment. Outputs will work in fail-safe or fail-secure modes and form "C" dry output allows for HVAC shutdown capabilities and can be programmed for auxillary devices. The AL300ULM comes with a built-in charger for lead acid or gel type batteries and offers short circuit and thermal overload protection, AC fail supervision and stand-by battery switchover functions. Input can be controlled with normally open/closed functions or through polarity reversal from a separate fire alarm control panel (FACP).

UPC: 782239930395
Also known as: AX-AL300ULM, ALT-AL300ULM

Technical Specifications:

Shipping Weight: 8.6 lbs (3.9 kg)
Weight: 7.6 lbs (3.447 kg)
System AC input VA requirement: 166.75VA
Maximum charge current: 0.7 amp
11-23BTU/Hr
Operating temperature: 0 C to 49 C ambient
Input Fuel Rate: 3.5 amp/250V
Input: 115VAC/60Hz, 3.5 amp
Dimensions: 13.5"H x 13"W x 3.25"D (343mm x 330mm x 83mm)

For more information about the Altronix AL300ULM, please contact us.

12VDC or 24VDC selective output
Fire Alarm Panel or Access Control System Trigger Input: N.O. or N.C supervised trigger input and polarity reversal trigger input
2.5 amp supply current
5 PTC protected outputs at 2 amp
Output relay energizes when unit is triggered (form C contact rated 1 amp at 28VDC)
Filtered and electronically rated output
Short circuit and thermal overload protection
Built-in charger for sealed lead acid or gel type batteries
Automatic switch over to stand-by battery when AC fails
AC fail supervision (form C contacts)
Low battery supervision (form C contacts)
Battery presence supervision (form C contacts)
Power fail supervision relay (form C contacts)
AC input and DC output LED indicators (power supply board)
Red LEDs indicate condition of power inputs (multi-output board)
Power and input trigger LEDs (mulit-output board)