Alarm Controls KP-103 Indoor Dual-Relay Digital Keypad
-
MPN: KP-103
-
JMAC ID: 202099824
The Alarm Controls KP-103 is an indoor dual-relay digital access control keypad designed for commercial electronic door security applications. Featuring two relay outputs and an auxiliary EG input, it provides a keypad-based interface for controlling compatible electric locking hardware and associated access control functions. Also identified as HES KP103, the unit supports integration into compatible access control installations where PIN-based operation and multiple control outputs are required. The KP-103 is intended for indoor use, with electrical connections, relay ratings, and programming requirements determined by its applicable hardware documentation.
Alarm Controls KP-103 Indoor Dual-Relay Digital Access Control Keypad
The Alarm Controls KP-103 Digital Access Control Keypad is an indoor electronic entry control device designed for commercial security installations requiring keypad-operated access and multiple relay-controlled functions. Identified in industry distribution catalogs as the KP-103 Indoor Dual-Relay Keypad with EG Input, the unit provides a user-operated interface for compatible electronic locking and access control equipment. Its dual-output configuration supports installations requiring more than one controlled circuit, while the auxiliary input accommodates an additional control function when connected to suitable equipment. The KP-103 is associated with the Alarm Controls and HES product families under ASSA ABLOY and is intended for use in professionally installed indoor door security applications.
The KP-103 incorporates two relay outputs for external access control connections, allowing authorized keypad operation to initiate switching functions in a compatible low-voltage security system. Depending on the installation configuration, these outputs can interface with appropriate electric locking devices, control relays, or auxiliary signaling equipment. The keypad also includes an EG input identified in the product's ordering description, providing an additional connection point for supported system functions. Proper operation depends on the selected power supply, connected electrical loads, and applicable programming settings. The precise relay contact ratings, input voltage specifications, operating current, and supported user code capacity should be confirmed using documentation corresponding to the installed KP-103 hardware revision.
Designed for PIN-based commercial access control, the Alarm Controls KP-103 provides a convenient means of initiating authorized entry through compatible electronic door hardware. The keypad is suitable for controlled interior entrances, security offices, equipment rooms, service areas, and other indoor locations requiring restricted access. Its dual-relay architecture supports separate control functions where permitted by the system design, while the EG input enables additional integration with compatible control equipment. The keypad can be incorporated into an existing access control installation or used as a replacement for the same model, provided the electrical connections and programming requirements are matched. It should not be assumed to support modern network protocols, wireless credentials, or centralized credential management without verification of the particular system configuration.
The Alarm Controls KP-103 is identified as an indoor keypad and should be installed in a protected environment rather than exposed directly to rain, washdown, or other outdoor conditions. Industry suppliers also identify separate KP-103 main board and keypad board replacement components, allowing technicians to distinguish complete keypad assemblies from individual service parts. The related KP-403 is identified as an outdoor dual-relay keypad and should not be treated as an electrically identical substitute without confirming wiring and system compatibility. For installation or service, technicians should verify the unit's manufacturer identification, power requirements, relay terminal assignments, auxiliary input operation, and supported mounting configuration. The KP-103 provides a legacy keypad control solution for maintaining compatible commercial access control systems that require indoor operation and dual-relay functionality.
Also known as: HES-KP103, KP103
For more information about the Alarm Controls KP-103, please contact us.