Adams Rite 4070-10-313 4070 Series Short Throw Deadbolt with Flat Faceplate and 7/8" Backset in Dark Bronze Also known as: 407010313 Adams Rite 4070-10-313 DEADLOCK
Short Throw Deadbolt with Flat Faceplate and 7/8" Adams Rite 4070 Series 4070-10-313 "Dark Bronze Anodized Finish Backset
In locations where the long-throw MS Deadlock cannot be employed, the 4070-10-313 series Deadlocks offer security for a typically projected bolt. The longest practicable throw for a normally projected bolt from a narrow stile is provided by this smaller 4070. It activates with a half key turn of any conventional mortise type cylinder or cylinder type thumbturn, and it projects or retracts the bolt with a 180 degree turn of the key or thumbturn. The bottom rail is not intended for use with this product. The lock will accept any common 1-5/32 key "mortise cylinder with a diameter from one or both sides. To fit, the cylinder needs a unique cam. |
Features:
- Dark Bronze Anodized finish
- Cylinder Backset: 7/8"
- Case is made of stainless steel with corrosion-resistant plating that measures 1" x 6" x depth (depth varies by backset)
- Bolt measures 5/8" x 1-1/4" x 5/8" throw
- Flat faceplate measures 1" X 5-5/8"
- Handed operation - Non Handed
- 4070 Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with MS cam
- Grade 2 strength
- Cylinder Backset: 1-3/4" only
- Case: Zinc alloy, measures 7/8" x 3-5/8" x 2-5/8" deep.
- Bolt: Brass with stainless steel dogs, 1/2" x 1-1/2" with 3/4" horizontal throw and 11/32" expansion above and below main bolt.
- Armored Faceplate: Flat faceplate of brass, 1' x 5-3/4". Available in a variety of finishes.
- Strike: 1/8" x 1" x 4-11/16" with 5/8" x 1-5/8" opening. Brass, with four-screw mounting. Trim finish same as faceplate.
- Special Cylinder Cam: Operable by any standard mortise cylinder with special cam dimensions, as shown. Cylinders with such cams can be readily obtained from most cylinder manufacturers.
- Options: Specify trim finish: US3 Polished Brass (605), US26 Bright Chrome (625), or US26D Satin Chrome (626).
- Standard Package: Individually boxed with strike and wood screws for mounting lock and strike. Shipping weight: 2 lbs.
- Cylinder Backset: 7/8", 31/32", or 1-1/8" only
- Case: Steel with corrosion-resistant plating. 1" x 6" x depth. Depth varies by backset.
- Bolt: 5/8" x 1-1/4" x 5/8" throw.
- Cylinder Cam: Operable by any standard mortise cylinder with special cam, dimensioned as shown. See CYLINDERS section for cylinder make, thumbturn and trim ring information.
- Strike: In metal installations, a slot in door jamb serves as strike. Deluxe trim strike 4170 is also available separately for wood installations.
- Standard Package: Individually boxed with machine screws for mounting. Cylinders and/or thumbturns available separately. Shipping weight: 1/2 lb.
|