Adams Rite 7400-M628 Electric Strike, 4-7/8" Faceplate, Strike Lip, Monitored, Clear Anodized
-
MPN: 7400M628
-
JMAC ID: 200246857
The Adams Rite 7400M628 is a monitored UltraLine electric strike designed for Adams Rite deadlatches and compatible cylindrical locksets in aluminum, hollow metal, and wood door frames. Featuring over 1,500 pounds of holding force, a 25-pound preload release capability, and two integrated Form C monitoring switches, it provides remote access control and lock status reporting. The strike offers field-selectable fail-safe or fail-secure operation, 12/24 VDC compatibility, and a 4-7/8-inch flat faceplate in clear anodized aluminum (628). Its non-handed design and adjustable stainless steel keeper support commercial access control installations.
Adams Rite 7400M628 UltraLine Monitored Electric Strike with 4-7/8-Inch Faceplate, Clear Anodized
The Adams Rite 7400M628 UltraLine Monitored Electric Strike provides electrically controlled door release and integrated monitoring for commercial access control systems. Designed for aluminum, hollow metal, and wood door frames, the strike accommodates compatible Adams Rite 4500, discontinued 4700, and 4900 Series deadlatches, along with cylindrical locksets featuring 1/2-inch to 5/8-inch latchbolt projection. Its adjustable stainless steel keeper delivers over 1,500 pounds (680.4 kg) of holding force in fail-secure operation, helping resist forced entry while maintaining controlled access. The 7400M628 releases electrically under up to 25 pounds (11.3 kg) of door preload, accommodating pressure caused by building ventilation systems, door warping, and minor alignment irregularities. Its non-handed construction supports left-hand and right-hand door configurations, making it suitable for retail storefronts, commercial offices, institutional buildings, and controlled-access entrances.
The 7400M628 incorporates two internally mounted Form C monitoring switches that provide separate indications of latchbolt engagement and electric strike locking status. The latch monitor detects when the latchbolt engages the strike keeper, while the solenoid status switch indicates the energized locked or unlocked condition. These monitoring outputs allow compatible access control panels and security systems to track door hardware conditions through normally open, normally closed, and common dry contacts. The manufacturer specifies a maximum monitoring contact switching current of 500mA at 30 VDC. Electrical operation uses a single solenoid with field-selectable 12 or 24 VDC power, drawing 440mA at 12 VDC or 230mA at 24 VDC. A separately available VA7400-16VDC adapter permits 16 VDC operation at approximately 460mA. The strike is supplied in fail-secure configuration, which remains locked during power loss, but can be mechanically converted to fail-safe operation when required by the application. Compatible DC power supports continuous-duty operation.
The Adams Rite 7400M628 features a compact strike body measuring 1-13/32 inches wide, 3-3/8 inches high, and 1-1/16 inches deep (35.7 85.7 27 mm). Its 1-1/4-inch-wide by 4-7/8-inch-long flat faceplate features radiused corners and a 628 clear anodized aluminum finish for compatibility with architectural aluminum door hardware. The adjustable strike opening measures 5/8 inch by 1-7/16 inches by 1/2 inch deep, with interchangeable keeper shims allowing installers to compensate for latch alignment and door clearance variations. The standard strike lip is designed for 1-3/4-inch-thick doors closing flush with the jamb edge, while optional lip extension kits accommodate different door and frame relationships. The standard package includes mounting screws, mounting tabs, adhesive spacers, adjustable keeper shims, and 12/24 VDC plug-in voltage adapters. Its quick-connect electrical connector simplifies voltage configuration, while the included mounting hardware supports installation in appropriately prepared metal and wood frames.
The Adams Rite 7400M628 Monitored Electric Strike supports integration with compatible card readers, keypads, access control panels, remote release switches, and security monitoring systems. Its dual monitoring contacts provide information about latch engagement and solenoid status, supporting centralized access control management and security event reporting. The UltraLine 7400 Series is UL 1034 burglary-resistant listed and suitable for outdoor use, UL 294 listed for access control applications, ULC-S319 listed, and ANSI/BHMA A156.31 Grade 1 certified. Optional accessories include Adams Rite lip extension kits, the WDC7400 wood door cover, ElectroLynx adapters, and the VA7400-16VDC voltage adapter. Unlike the unmonitored Adams Rite 7400-628, the 7400M628 includes factory-installed latchbolt and solenoid monitoring switches. Its combination of preload release capability, field-selectable locking configuration, compact construction, and integrated status monitoring makes it suitable for commercial door electrification and upgrades to compatible existing access control openings. Installation must follow manufacturer instructions and applicable building, electrical, and life safety codes.
UPC: 999999348915
Also known as: R8-7400M628
Technical Specifications:
|
For more information about the Adams Rite 7400M628, please contact us.
- Case: Approximately 1” x 3-3/8” x 1-1/16” deep.
- Fail-Safe/Fail-Secure: Field selectable at time of installation.
- Strike Lip: Basic 7400 electric strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this configuration, lip extension kits are available.
- Strike Opening: 5/8” adjustable x 1-7/16” x 1/2” deep. Bolt retainer jaw is stainless steel. Strike accepts bolt of Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical latches.
- Faceplate: Measures 1-1/4” x 4-7/8”. 7400 has flat faceplate; 7401 is radiused to match nose on inactive leaf in a pair of aluminum stile glass doors. Available in a wide range of architectural finishes.
- Voltage: Field selectable to match power source of 12, 16, or 24 VAC/VDC.
- Clear anodized finish
- Monitored - Two internally mounted switches (Form “C") to indicate when the latchbolt is engaged in the strike jaws and a locked/unlocked solenoid status
1 Review
-
ADAMS-RITE-7400M628