Adams Rite 3090-01-121 eForce Keypad Lever Dark Bronze

The Adams Rite 3090-01-121 eForce-150 is a battery-operated electronic keypad entry trim designed for compatible Adams Rite deadlatches and 8000 Series exit devices. Featuring up to 150 user credentials, three programmable operating modes, and adjustable 1-9-second access timing, it provides standalone keyless entry without external power wiring. The device operates on four AA batteries rated for up to 60,000 activations and features a clutch-protected lever, mechanical key override capability, and 121 dark bronze powder-coated finish for commercial access control applications.

Adams Rite 3090-01-121 eForce-150 Electronic Keypad Entry Trim for Deadlatches and Exit Devices, Dark Bronze

The Adams Rite 3090-01-121 eForce-150 Keyless Entry provides standalone electronic access control for commercial doors equipped with compatible Adams Rite deadlatches and exit devices. Designed for aluminum stile and hollow metal door applications, the battery-powered keypad trim allows authorized users to unlock a door by entering a programmed access code rather than relying exclusively on mechanical keys. The unit supports up to 150 users, including master, supervisor, emergency, and standard user credentials, plus two one-time access codes. Its 121 dark bronze powder-coated finish is designed to complement architectural hardware with a 313 dark bronze anodized appearance. Typical applications include retail storefronts, commercial offices, educational facilities, warehouses, and controlled-access entrances. The 3090-01 configuration is designed specifically for latching hardware, including Adams Rite 4510, 4530, 4900, and 4920AN Series deadlatches and compatible 8000 Series exit devices, providing a retrofit solution without replacing the existing lock mechanism when installation requirements are met.

The 3090-01-121 electronic keypad supports three programmable operating modes: Standard, Passage, and Lockout. In Standard mode, an authorized user enters a 2-7-digit access code followed by the star (*) key, temporarily enabling the lever to operate the connected latch or exit device. The user then rotates the lever downward approximately 90 degrees to retract the latch, with an adjustable access period of 1-9 seconds. Passage mode permits unrestricted entry through the exterior lever until the mode is canceled, while Lockout mode restricts normal user credentials without disabling authorized administrative access. All programming is performed directly through the keypad, eliminating the need for dedicated programming software or a network connection. The device incorporates LED indicators and an audible piezo sounder to confirm successful code entry, programming activity, and invalid access attempts. A configurable keypad lockout feature temporarily prevents additional entry attempts after consecutive incorrect codes, while master, emergency, and supervisor credentials support administrative control and continued access during low-battery conditions.

The Adams Rite 3090-01-121 features a slim, surface-mounted housing measuring 1-3/4 inches wide and 15-3/8 inches high (44.5 390.5 mm), suitable for door thicknesses from 1-3/4 inches to 2-1/4 inches (44.5-57.2 mm). Its cast zinc alloy lever incorporates a clutch-protection mechanism that allows the handle to rotate without operating the latch when the device is locked, helping protect the internal components against forced operation. The non-handed design allows installers to configure the lever for compatible left-hand or right-hand door applications. Power is supplied by four replaceable AA alkaline batteries, with the manufacturer specifying a capacity of up to 60,000 activations under suitable operating conditions. A low-battery warning provides notification before the device enters its restricted-access battery protection mode. The UV-stable keypad and weather-resistant construction support indoor and outdoor operation from -31 F to 151 F (-35 C to 66 C), with 5-95% non-condensing relative humidity. Installation uses concealed fasteners and includes mounting hardware for compatible metal doors.

The Adams Rite 3090-01-121 eForce-150 is compatible with Adams Rite 8000 Series exit devices and supported deadlatches with 31/32-inch or greater backsets, including applicable surface vertical rod, concealed vertical rod, mortise, and rim exit device configurations. The manufacturer also identifies compatibility with selected Corbin Russwin ED4000 Series exit devices, subject to model verification. A mechanical key override can be provided using a separately purchased 1-inch to 1-1/2-inch mortise cylinder with an Adams Rite MS cam, such as the 4036 Series mortise cylinder. For applications requiring an external activation switch, the optional RSK-3090 remote activation kit enables the keypad trim to be unlocked through a compatible normally open dry-contact input. The device is FCC Part 15 compliant and provides a standalone access solution without requiring a central access control panel. Unlike the Adams Rite 3090-02, which is specifically designed for MS Series deadlocks, the 3090-01-121 operates compatible deadlatches and exit devices. Its programmable credentials, mechanical key override option, clutch-protected lever, and battery-powered construction support security upgrades to existing commercial doors while preserving the operation of compatible mechanical egress hardware. Installation must follow Adams Rite instructions and applicable building and life safety requirements.