MS Sedco
MS Sedco Door Activation Switches and Sensors
MS Sedco makes what opens an automatic door: push plate switches, touchless infrared switches, wireless radio control transmitters and receivers, microwave and ultrasonic sensors, and the mounting boxes and time delay modules that go with them. Browse the full MS Sedco catalog below.
Push Plate Switches
The 59 Series is the standard actuator, listed as a 4-1/2 inch square face plate in blue or stainless steel, printed WHEELCHAIR / PRESS TO OPERATE DOOR or PRESS TO OPERATE DOOR. The 59J Series is the narrow jamb version at 1-11/16 by 4-1/2 inches in stainless steel, printed WHEELCHAIR / PUSH TO OPEN, for a frame with no wall beside it. Replacement face plates are listed separately for each switch, which is the usual repair when a plate is scratched or the legend is worn off, and bollard assemblies cover approaches with no wall or jamb at all.
Touchless and Infrared Switches
The 216 Series is an active infrared switch that opens the door on a hand wave rather than a push. Activation distance is adjustable from 6 inches to 30 inches, and the range is listed as ideal for ADA applications, restrooms, industrial clean rooms and surgical areas, in face plate sizes to fit a 1-3/4 inch door frame, a single-gang box or a square opening. Wireless touchless switches are listed for retrofits where running cable to the switch is not practical.
ClearPath Radio Control
ClearPath is the wireless side. Transmitters are listed as wall mount, jamb mount and round wall plates, each supplied complete with the transmitter, integrated signal enhancing antennas, wire harness and a 9V battery already fitted in a surface mounting box, along with 1-button and 2-button handheld micro-transmitters with a neck chain. Receivers are compact multi-mode units, one including Mode 1 and 2 and one adding Mode 3 and 4 with sequenced output. Vestibule sequencing transmitters open a pair of vestibule doors one after the other from either direction, and turnkey packages bundle two switches, two transmitters and a receiver for a low energy door.
Spectrum Wireless
The Spectrum line runs at 2.4Ghz with transceivers rather than one way transmitters, in wall and jamb mount boxes and as a handheld button. A coordinator provides two outputs and pairs with up to 64 transceivers, which is what a building with many activated doors needs rather than a receiver per opening.
Motion and Presence Sensors
Microwave sensors mount on the header and fit a 1-3/4 inch door frame, with visible LEDs to verify activation, human presence radar for an additional level of motion protection, adjustable unidirectional and bi-directional patterns and narrow and wide pattern antennas, with rain covers and universal mounting brackets listed as accessories. Industrial door and explosion proof microwave detectors are listed for harder environments, and an ultrasonic vehicle presence sensor gives true presence detection of a single lane as an above ground replacement for a loop detector, adjustable up to 22 feet.
Boxes and Time Delay Modules
Mounting boxes are listed by application: a universal jamb box at 2 inches deep for 59J and other jamb mount switches, and a two piece box whose design makes battery replacement quick for wireless switches, compatible with the 59, 59V, 1078, 216, 730 and 614 Series. Time delay modules let one module cover any automatic door operation, including electrically or magnetically locked doors and vestibule sequencing, with a high current version providing up to 4 inputs convertible to sequential relay outputs, each adjustable from 0 to 99 seconds.
MS Sedco Spec Help
Choosing a plate size for a jamb, wiring a wireless kit to a low energy operator, or setting up vestibule sequencing? Contact our team with your door, operator and mounting and we can help you choose the right MS Sedco parts.