Knowledge Base:  

How to I access the programming mode on my LYNX Plus L3000?


Last Updated: 11/18/2013
By

To access programming mode:

1. Enter your installer code into the L3000 control panel keypad. (The default installer code is 4112) Then type (800) to access the programming mode.

2. If you DO NOT know your installer code, and the default installer code (4112) is not working, unplug the L3000 Panel transformer plug and the backup battery. Then reconnect the battery and transformer plug. In the first minute of system reboot, press and hold the asterisk (*) and (#) keys until the number (20) appears on the display. Press (*20) and type in a new 4-digit installer code. Now follow the steps in procedure (1) to access programming mode.


Similar Products:
LYNX Touch L5100
L5100-SIA
L5000


Was this article helpful?

Comments:
 

Related Articles
 >

Can the Honeywell L3000 support APL?


 >

How many sensors can work with the L3000 LYNX Plus?


 >

How do I program user codes on the L3000 LYNX Plus control panel?


 >

Can I control the LYNX Plus L3000 using a smartphone?


 >

Can I use Total Connect to program my LYNX Plus L3000?


 >

How do I enable chime mode on my LYNX Plus L3000?


 >

How do I program the date and time on my LYNX Plus L3000 Control Panel?


 >

How long will the backup battery last for the LYNX Plus L3000 Control Panel?