Edwards Signaling 95B-N5 Signaling Device Light Duty Strobe With Horn, Blue, 120 VAC 50/60 HZ, 0.1 A
-
MPN: 95B-N5
-
JMAC ID: 200613624
Edwards Signaling 95B-N5 Light duty indoor/outdoor strobe. Designed for PLC. Direct, conduit or box mounted. Blue Lens. 120V AC
Blue, 120 VAC, 50/60 Hz, 0.1 A, Light Duty Strobe with Horn, Edwards Signaling Products (95B-N5)
The light-duty AdaptaBeacon strobe lights from the Edwards 95 Series with internal horn are intended for use in industrial, commercial, and institutional settings where intermittent visual signaling is needed for a brief period of time. a set of complementary fresnels that, each time the strobe flashes, cause the dome to "fill" with light. By increasing the AdaptaBeacon "on-time," this design element enhances viewer perception. External fresnel lenses extend the beam distance. The power supply has trigger and timing circuitry built in as standard components. As only the strobe tube needs to be replaced, replacement expenses are decreased.
Designed for installation either inside or outside. It might be box mounted on a 4" (102mm) octagon box on any plane, 1/2" (13mm) conduit, or direct. However, vertical positioning guarantees the widest beam projection possible. The dome of the unit must be set up vertically for weatherproof installations. Can be wall mounted or put in a corner using the Cat. No. WBR wall mount bracket or Cat. No. CBR corner mount bracket. To provide further defense against lens damage, there is a cat. no. 92-GRD lens guard available. For accessories, see AdaptaBeacon.
They are best suited for installations where strong ambient lighting makes it impossible to discern standard rotating or flashing lights or when strong ambient noise makes it difficult to hear auditory signals. Typically used to signal equipment failures, security breaches, or to locate problematic areas. The majority of industrial and commercial areas can accept installation thanks to the gasketed waterproof design.
UPC: 0782640218228
Also known as: 95BN5
For more information about the Edwards Signaling 95B-N5, please contact us.
Blue, 120 VAC, 50/60 Hz, 0.1 A, Light Duty Strobe with Horn, Edwards Signaling Products (95B-N5)
The light-duty AdaptaBeacon strobe lights from the Edwards 95 Series with internal horn are intended for use in industrial, commercial, and institutional settings where intermittent visual signaling is needed for a brief period of time. a set of complementary fresnels that, each time the strobe flashes, cause the dome to "fill" with light. By increasing the AdaptaBeacon "on-time," this design element enhances viewer perception. External fresnel lenses extend the beam distance. The power supply has trigger and timing circuitry built in as standard components. As only the strobe tube needs to be replaced, replacement expenses are decreased.
Designed for installation either inside or outside. It might be box mounted on a 4" (102mm) octagon box on any plane, 1/2" (13mm) conduit, or direct. However, vertical positioning guarantees the widest beam projection possible. The dome of the unit must be set up vertically for weatherproof installations. Can be wall mounted or put in a corner using the Cat. No. WBR wall mount bracket or Cat. No. CBR corner mount bracket. To provide further defense against lens damage, there is a cat. no. 92-GRD lens guard available. For accessories, see AdaptaBeacon.
They are best suited for installations where strong ambient lighting makes it impossible to discern standard rotating or flashing lights or when strong ambient noise makes it difficult to hear auditory signals. Typically used to signal equipment failures, security breaches, or to locate problematic areas. The majority of industrial and commercial areas can accept installation thanks to the gasketed waterproof design.
UPC: 0782640218228
Also known as: 95BN5
For more information about the Edwards Signaling 95B-N5, please contact us.