Xantech DL85K LCD/CFL Proof Dinky Link IR Receiver Kit
-
MPN: DL85K
-
JMAC ID: 200004524
The Xantech DL85K Universal Dinky Link IR Receiver Kit is a complete infrared repeater system designed to control up to 4 concealed audio/video components using existing IR remote controls. Featuring an 80-foot reception range, 25-60 kHz IR frequency bandwidth, and ambient light interference suppression, the kit supports reliable operation near LED, LCD, plasma displays, and CFL lighting. It includes a DL85 surface-mount IR receiver, 789-44 connecting block, four Blink-IR emitters, 12 VDC regulated power supply, and interchangeable black, white, and silver trim.
Xantech DL85K Universal Dinky Link IR Receiver and Repeater Kit
The Xantech DL85K Dinky Link IR Receiver Kit provides centralized infrared remote control for audio/video equipment installed inside enclosed cabinets, entertainment centers, equipment closets, and other locations outside the remote control's direct line of sight. The system receives infrared commands through a compact surface-mounted DL85 sensor and distributes them to up to 4 connected A/V components using individual infrared emitters. Compatible equipment includes cable boxes, satellite receivers, televisions, DVD players, and home theater receivers that accept infrared remote commands. The DL85 receiver supports a reception range of up to 80 feet (24 meters), allowing users to operate concealed equipment from a central control location. Actual reception distance depends on remote control signal strength and surrounding lighting conditions.
The DL85K incorporates proprietary ambient noise suppression, native carrier frequency transmission, and interference filtering to maintain infrared signal accuracy in environments containing LED, LCD, and plasma televisions or compact fluorescent lighting. Its 25-60 kHz infrared carrier frequency bandwidth accommodates common consumer electronics remote control protocols, while a 60-degree reception angle provides flexibility when positioning the receiver. The compact DL85 sensor measures approximately 2.55 x 0.55 x 0.35 inches and requires 12 VDC at 10 mA. An integrated red talkback LED indicates received IR commands for system testing and troubleshooting. The receiver also features a rear wire-routing channel and low-profile housing that supports discreet installation beneath shelves, along cabinet edges, or near television displays.
The Xantech DL85K infrared repeater kit includes one DL85 IR receiver, one 789-44 connecting block with 4 emitter output ports, four Blink-IR Designer emitters, one regulated 12 VDC power supply, installation instructions, and a trim kit with black, white, and silver finishes. The connecting block distributes commands from the receiver to the infrared emitters positioned over the IR sensor windows of individual A/V components. Its output capacity supports up to 4 dual IR emitters when compatible emitters are purchased separately. Color-coded connections simplify installation, with the receiver connected to the red IR input and emitters connected to the yellow output ports. The receiver includes a 7-foot cable with a 3.5 mm connector, while supplied adhesive mounting materials allow placement without extensive hardware modifications.
For home theaters, media rooms, commercial audiovisual installations, and centralized equipment cabinets, the DL85K enables infrared control without exposing individual components to direct remote control signals. The receiver can be installed near a television, beneath a cabinet shelf, or behind a suitable speaker grille while the connecting block and controlled equipment remain concealed. For extended installations, the receiver connection supports 3-conductor wiring over distances up to approximately 1 mile using 18 AWG cable, subject to manufacturer wiring recommendations and environmental conditions. Installers should position the sensor away from direct reflections and strong interference sources while attaching each emitter directly over the controlled component's infrared receiving window. The DL85K includes a limited lifetime manufacturer warranty and provides a complete wired IR distribution solution for operating multiple concealed A/V components using existing handheld remotes.
UPC: 42777318360
Also known as: VO-DL85K
Technical Specifications:
|
For more information about the Xantech DL85K, please contact us.
- Low profile—easy to hide
- Works with all types of cable boxes, satellite boxes, remotes and TVs
- Color-coded connectors for fast, easy installation
- The 789-44 connects one IR receiver to 4 IR emitter ports and has enough power to drive up to 4 dual emitters
- Reception range: up to 80 ft/24 m*
- Proprietary ambient noise-suppression technology for reliable operation in any lighting environment including compact fluorescents
- IR modulation frequency bandwidth: 25-60kHz
- 4 Blink-IR Designer emitters, 1 Instruction manual, 1 Trim kit to match white, silver, and black AV components
- Kit includes: 1 DL85 IR receiver, 1 Model 789-44 connecting block, (1) 12VDC regulated power supply,