Von Duprin LM6400 Series Electric Strike, Plug-In Latch Monitor, Satin Stainless Steel
Also known as: VN-LM6400
Von Duprin LM6400 Plug-in Latchbolt Monitor, 24VDC, For use with 6400 Electric Strikes
Almost any cylindrical or mortise lock, including those with offset latches, can be fitted with the 6400 Series electric door strike thanks to its extremely adjustable architecture. It offers a fail-secure only solution for openings that can withstand fire.
The easy-to-install 6400 Series is a good fit for installations where misalignment or a tight fit may be an issue because the strike allows installers to insert and lock in place the deadbolt keeper, or the plug and dead latch ramp, anywhere within its 3-1/8" vertical opening to suit latch bolt position and functional needs. |
Features:
- Fits cylindrical and nearly any mortise lock
- For interior or exterior doors with hollow metal, aluminum, or wood frames
- 3-hour fire-rated to UL 10C (fail secure only)
- Modular design is configurable to functional needs
- Two faceplates standard
- Field-selectable 12/24 VDC or 12/24 VAC
- Non-handed, internal solenoid design
- 1/8" horizontal with a range of vertical adjustments for misaligned doors & frames
- Heavy-duty stainless steel construction
- 1500 lbs. static strength
- Built to Last with Heavy Duty Materials
- Modular design fits cylindrical and nearly any mortise lock
- Most Von Duprin Parts Are Made For a Specific Finish
- Heavy-duty stainless steel construction in BHMA 630 satin finish
- Non Handed
- Vertical adjustments allow for alignment with a wide variety of mortise locks with offset latches
- Most Von Duprin Parts Are Made For a Specific Series
- Horizontal adjustment of up to 1 8" improves fit on tight door preps Can accommodate up to 1" deadbolt (for night latch only)
- Limited 1 Year Mechanical and Electrical Warranty
- Field selectable voltage 12 or 24VDC and 12 to 24VAC
- Plug-in voltage connectors are included for ease of installation and removal during strike servicing
- Optional plug-in latchbolt monitor can be added in the field
- Non-handed, unique internal solenoid design prevents keeper from heating up
- Low current draw (0.19 amps @ 24 VDC)
- Suitable for interior and exterior doors
- UL 1034 listed for burglary-resistant electric door strikes
- Meets ANSI/BHMA A156.31, Grade 1 for endurance and dynamic strength
- Meets ANSI/BHMA A156.31, Grade 1, 1500 lbs static strength Dynamic strength 70 ft-lbs
- Endurance 2,000,000 cycles
- 70 ft-lbs. dynamic strength
|
