Von Duprin 050237 Replacement Solenoid Kit 12VDC for 6100 and 6200 Series Electric Strike, Fail Safe

The Von Duprin 050237-00 is a 12VDC replacement solenoid kit for 6100 and 6200 Series electric strikes, designed to restore electrical locking and release functionality in compatible commercial access control installations. Supporting both fail-safe (FS) and fail-secure (FSE) configurations, the kit includes a replacement solenoid, plunger, spring, and washer. The solenoid features yellow identification wires and is also associated with part number SA-5042-3. Installation compatibility depends on the electric strike's mechanical design and hardware revision, particularly units manufactured before the 2020-2021 solenoid redesign.

Von Duprin 050237-00 12VDC Replacement Solenoid Kit for 6100 and 6200 Electric Strikes

The Von Duprin 050237-00 Replacement Solenoid Kit is an original equipment service component designed to restore the electrically controlled locking and unlocking functions of compatible Von Duprin commercial electric strikes. Manufactured by Von Duprin, an Allegion brand, the 050237-00 is specifically identified as a 12VDC solenoid replacement kit for the 6100 and 6200 Series electric strikes. The kit supports both fail-safe (FS) and fail-secure (FSE) strike configurations, making it suitable for servicing approved electric strike assemblies with either power-loss operating function. It is intended for commercial access control maintenance, repair, and voltage-specific component replacement in facilities using compatible Von Duprin electric locking hardware.

The 050237-00 kit includes a 12VDC electromagnetic solenoid, matching plunger, return spring, and washer, providing the principal replacement components required for compatible solenoid-actuated strike mechanisms. When connected to an appropriate regulated DC power source, the solenoid generates an electromagnetic field that moves the associated plunger and operates the strike's internal release linkage. Allegion identifies the 12VDC solenoid by its yellow electrical leads and notes that certain components may carry the alternate identification SA-5042-3. The 050237-00 is voltage-specific and should not be connected directly to a 16VDC, 24VDC, or 28VDC supply. Separate solenoid kits are available for those operating voltages. Electrical current consumption and duty-cycle requirements must be determined from the applicable 6100 or 6200 Series electric strike documentation and the installed hardware configuration.

Designed for maintenance of Von Duprin 6100 and 6200 Series electric strikes, the 050237-00 replacement kit can be used in compatible fail-safe and fail-secure installations. In a fail-safe strike configuration, the keeper releases when electrical power is removed, while a fail-secure strike remains locked without power and releases when appropriately energized. The replacement solenoid supplies the electrical actuation necessary for the strike's existing mechanical configuration; the solenoid kit alone does not determine or convert the strike's fail-safe or fail-secure operating function. It can be installed as part of a properly matched service repair to restore electrical actuation without replacing the complete electric strike, provided the existing backbox, slider mechanism, and associated components remain compatible and serviceable.

The Von Duprin 050237-00 requires careful verification of the existing electric strike's mechanical revision before installation. Allegion documents a change to the solenoid plunger and corresponding internal cavity that occurred around late 2020 to early 2021. In compatible strike designs where the slider hook engages the plunger directly and the plunger can be replaced, the updated kit may be installed with the appropriate matching components. Earlier strike configurations using an indirect pin-and-slider connection may not accommodate the revised plunger and can require replacement of the complete backbox assembly. Allegion specifically identifies the 6100 and 6200 Series as serviceable with replacement solenoid kits, while the newer 6300 and 6400 Series use different electrical assemblies and do not accept the 050237-00 kit. Installation should follow the manufacturer's electric strike service manual, including verification of the 12VDC supply, wire connections, mechanical alignment, and proper locking and release operation. The 050237-00 provides a targeted OEM repair solution for maintaining compatible Von Duprin electric strikes in commercial door security systems.